Panasonic CQ-5100U warranty Speaker Connections, Product Servicing, Fuse, Wrong Chassis

Speaker Connections

Caution

Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

		<Right>
L +		(White)
		+
	-	-
		(White
		w/black stripe)
	+	(Gray)
R		+
	-	-
		(Gray
		w/black stripe)

•Use ungrounded speaker only.

•The maximum speaker input should be 37 W or more. (If used with the optional power amplifier, the speaker input should be higher than the maximum amplifier output.)

•The speaker impedance should be 4 - 8 Ω.

•This unit uses the BTCL circuit, so each speaker should be connected separately using parallel vinyl insulated cords.

•The speaker cords and the power amplifier unit should be kept away (about 30 cm apart) from the antenna and antenna extension cord.

<Wrong>

L	+	+
	-	-
		Chassis
	+	+
R -		-

Chassis

•Never connect the speaker cord to the body of the car.

L	+	+
	-	-
	+	+
R -		-

•Do not use a 3-wire type speaker system having a common earth lead.

L	+	+	+
	-	-	-
	+	+	+
R -		-	-

•Do not connect more than one speaker to one set of speaker leads.

Product Servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.

Fuse

If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter.

Warning

•Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter.

22

CQ-5100U