Panasonic CQ-5100U warranty Installation Guide, Overview, Dashboard Specifications

Page 23

Installation Guide

WARNING

This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non- technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.

Any attempt to install this product in a motor vehicle by anyone other than a professional installer could cause damage to the electrical safety system and could result in serious personal injury or death.

If your car is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection of the battery to install this product.

Before attempting installation of this electronic component against the manufacturer's recommendation, you must contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions.

FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.

Overview

This product should be installed by a professional. However, should you decide to install the product against the manufacturer’s recommendation, these operating Instructions do not contain electrical installation instructions. You must contact your car dealer or manufacturer for electrical connection instructions to avoid possible damage to your electrical safety systems and resulting injury or death. (Please

refer to the “WARNING” statement above).

Your next step is to decide where to install the unit. The instructions in these pages will guide you through the remaining steps:

Identify and label the car wires.

Connect the vehicle wires to the wires of the power connector.

Install the unit in the dashboard.

Check the operation of the unit.

If you encounter problems, please consult your nearest professional installer.

Warning

Before you begin installation, look for the following items which are packed with your unit.

Operating Instructions (including “Limited Warranty” and “Customer Service Directory”).

Installation Hardware .....Needed for Installation.

Dashboard Specifications

Thickness Min. 4.75 mm {3/16"}

Max. 5.56 mm {7/32"}

53 mm {23/32"}

182 mm {75/32"}

¡This unit operates with a 12 V DC negative @ ground auto battery system only. Do not attempt to use it with any other system. Doing so could cause serious damage.

23

CQ-5100U

Image 23
Contents Heavy Duty CD player/Weather Band Receiver Model CQ-5100UObserve the following warnings when installing Safety InformationObserve the following warnings when using this unit Following applies only in the U.S.A Observe the following cautions when using this unitObserve the following cautions when installing Npcparts @panasonic.com Customer Services DirectoryAccessory Purchases Service in Puerto RicoPanasonic Consumer Electronics Company Limited WarrantyContents Mute Power and Sound ControlsPower VolumeSQ Sound Quality Bass Treble Push Volume Push SEL to select the audio mode12-hour system is used for the clock Clock AdjustmentTime Reset Selecting the Clock DisplayRadio Radio ModeManual Tuning Seek TuningPreset Station Calling Radio Preset Station SettingAuto Preset Memory APM Manual Preset MemoryWeather Band Stations Tuning in a Weather Band StationListening to a CD CD PlayerDisc Insert and Playback Disc insert Stop and Disc EjectRepeat play Random play Scan play PauseTrack Selection Track SearchConnecting with the portable audio player AUX Auxiliary Input ModeListening to the portable audio device If You Suspect Something Wrong TroubleshootingCommon Radio Adjust mounting angle to less than 30˚Connect the cables correctly Sound SettingError Display Messages Connect the speaker wires to the correct onesCleaning this Unit MaintenanceWrong Chassis Speaker ConnectionsProduct Servicing FuseRefer to the Warning statement above Installation GuideDashboard Specifications OverviewDiagram Q’ty Dashboard InstallationInstallation Hardware Installation OpeningExampleTab Battery terminalInsert Mounting Collar q into Mounting springs CTo Remove the Unit from the vehicles dashboard Electrical Connections Wiring DiagramSpecifications Memorandum Memorandum Memorandum