Specifications
Continuous Power Output | 130 watts/ch | |
|
| |
Bridged Mono Power Output | 360 watts/ch | |
|
| |
Total Harmonic Distortion | < 0.03% | |
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) | < 0.03% | |
Frequency Response ( +0.5, | ||
Damping Factor | 500 |
|
Speaker Impedance (Normal mode) | 4 ohms minimum | |
Signal to Noise Ratio (IHF A network) | 120 dB | |
Input Impedance/Sensitivity | 33 k Ohms/1.0 volt | |
Power Requirements | 115 | Volts, 60 Hz or |
| 230 | Volts, 50 Hz |
Power Consumption | 400 | Watts |
Dimensions (W x H x D) | 440 x 121 x 327 mm | |
| 173/8” x 43/4” x 127/8” | |
Weight (net) | 10.3 kg, 22.66 lb. |
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
RB-981
Technische Daten
Dauerausgangsleistung | 130 | Watt pro Kanal |
|
| |
Ausgangsleistung bei Brückenschaltung | 360 wattsÊ | |
|
| |
Gesamtklirrfaktor (20 - 20.000 Hz, 8 Ohm) | < 0,03 % | |
Intermodulationsverzerrung (60 Hz : 7 kHz, 4:1) | < 0,03 % | |
Frequenzgang ( +0,5, | 4 bis 100.000 Hz | |
Dämpfungsfaktor | 500 |
|
Lautsprecherimpedanz (Normalbetrieb) | Minimum 4 Ohm | |
Geräuschspannungsabstand (IHF A) | 120 dB | |
33 kOhm/1,0 V | ||
Spannungsversorgung | 230 | Volt, 50 Hz |
Max. Leistungsaufnahme | 400 | Watt |
Abmessungen (B x H x T) | 440 x 121 x 327 mm | |
Nettogewicht | 10,3 kg |
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung. Änderungen in Technik und Ausstattung vorbehalten.
Fiche technique
Puissance de sortie continue | 130 watts par canal | |
(20 Hz à 20 kHz, 0,03 %, 8 ohms) |
|
|
Puissance de sortie en mode ponté en mono | 360 watts par canal | |
(20 Hz à 20 kHz, 0,1 %, 8 ohms) |
|
|
Distorsion harmonique totale (20 | < 0.03 % | |
Distorsion d’intermodulation (60 Hz : 7 kHz, 4:1) | < 0.03 % | |
Réponse en fréquence ( + 0.5 dB, | 4 Hz à 100 kHz | |
Facteur d’amortissement | 500 |
|
Impédance des enceintes (mode normal) | 4 ohms minimum | |
Rapport signal/bruit (IHF A network) | 120 dB | |
Impédance d’entrée/Sensibilité | 33 kohms/1.0 volt | |
Alimentation | 115 | Volts, 60 Hz ou |
| 230 | Volts, 50 Hz |
Consommation | 400 | Watts |
Dimensions (L, H, P) | 440 x 121 x 327 mm | |
Poids (net) | 10.3 kg / 22.66 lb. |
Toutes les spécifications de cet appareil étaient exactes au moment de l’impression de ce guide. Rotel se réserve le droit de les modifier sans préavis.
Caratteristiche
Potenza di uscita continua | 130 | Watt p/c |
Potenza d’uscita in configurazione “a ponte” | 360 wattsÊ | |
|
| |
Distorsione armonica totale | < 0.03% | |
Distorsione d’intermodulazione (60 Hz, 7kHz, 4:1) | < 0.03% | |
Risposta in frequenza | ||
Fattore di smorzamento | 500 |
|
Impedenza altoparlanti (normal) | 4Ω minimo | |
Rapporto segnale/rumore (IHF A) | 120 dB | |
Impedenza d’ingresso/Sensibilità | 33kΩ/1.0 volt | |
Alimentazione | 115 | Volt/60Hz |
| 230 | Volt/60 Hz |
Assorbimento | 400 W | |
Dimensioni (LxAxP) | 440x121x327mm | |
Peso (netto) | 10.3 Kg |
Tutte le caratteristiche sono corrette al momento della stampa. Rotel si riserva il dirito di apportare miglioramenti senza darne preavviso.
Características Técnicas
Potencia Continua de Salida | 130 vatios/canal |
| |
Potencia Continua de Salida | 360 vatios |
en Modo Monofónico Puenteado | |
| |
Distortión Armónica Total | < 0’03% |
Distortión por Intermodulación (60 Hz : 7 kHz, 4:1) | < 0’03% |
Respuesta en Frecuencia ( +0’5, | |
Factor de Amortiguamiento | 500 |
Impedancia de las Caja Acústicas (modo Normal) | mínima de 4 ohmios |
Relación Señal/Ruido (norma IHF/ ponderación A) | 120 dB |
Sensibilidad/Impedancia de Entrada | 33 kohmios/1’0 V |
Alimentación | 115 voltios/60 Hz |
| 230 voltios/50 Hz |
Consumo | 400 vatios |
Dimensiones (An x Al x P) | 440 x 121 x 327 mm |
Peso Neto | 10’3 kg |
Todas estas especificaciones son correctas en el momento de la impresión del presente manual de instrucciones.
Rotel se reserva el derecho a realizar modificaciones en las mismas sin aviso previo.
25