Panasonic CQ-5100U warranty Specifications

Specifications

❐ General

Power Supply:	12 V DC (11 V-16 V) test Voltage 14.4 V, Negative @ ground
Current consumption:	Less than 2.5 A (CD mode, 0.5 W 4-speaker)
Maximum Power Output:	37 W ⋅ 4 channels at 400 Hz, Volume Control maximum
Tone adjustment range:
Bass:	± 12 dB at 100 Hz
Treble:	± 12 dB at 10 kHz
Power Output:	18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
Suitable Speaker Impedance:	4-8 Ω
Dimensions (W H D):	178(W) 50(H) 150(D) mm {7" 1-15/16" 5-7/8"}
Weight:	1.3 kg {2.8 lbs.}

❐ Front AUX Input

Input impedance:	10 kΩ
Allowable external input:	2.0 V
Connector:	3.5 mm ø stereo mini pin

❐ FM Stereo Radio

Frequency Range:	87.9-107.9 MHz
Useable Sensitivity:	12 dBf. (1.1	µV/ 75 Ω, S/N 30 dB)
50 dB Quieting Sensitivity:	17 dBf. (1.8	µV/ 75 Ω)
Frequency Response:	30-15 000 Hz ±3 dB
Alternate Channel Selectivity:	75 dB
Stereo Separation:	35 dB at 1 kHz
Signal/Noise Ratio:	70 dB (Mono)

❐ AM Radio

Frequency range:	530 kHz – 1 710 kHz
Usable sensitivity:	28 dB/µV (25 µV, S/N 20 dB)

❐Weather Band Radio

Frequency range:	162.40 – 162.55 MHz
Usable sensitivity:	3 dB/µV (S/N 20 dB)
Signal/Noise Ratio (40 dB/µV):	50 dB

❐ CD Player

Sampling Frequency:	32 times oversampling
DA Converter:	MASH•1 bit/4 DAC System
Error Correction System:	Panasonic Super Decoding Algorithm
Pick-Up Type:	1-beam
Light Source:	Semiconductor laser
Wavalength:	790 nm
Frequency Response:	20 - 20,000 Hz (±1 dB)
Signal to Noise Ratio:	85 dB
Total Harmonic Distortion:	0.01 % (1 kHz)
Wow and Flutter:	Below measurable limits
Channel Separation:	75 dB

Above specifications comply with EIA standards.

Power Output:

18 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N

Signal to Noise Ratio:

85 dBA (reference: 1 W into 4 Ω)

Note: Specifications and the design are subject to modification without notice due to improvements in technology.

28

CQ-5100U