Jet Tools DC-650CRC, DC-650ARC Introduction, Specifications, DC-650 Series Dust Collector

Introduction

This manual is provided by JET covering the safe operation and maintenance procedures for models DC-650 Series Dust Collectors. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group.

Specifications

DC-650 Series Dust Collector

Model		DC-650A/ARC	........................................ DC-650C/CRC
Stock Number		708640/708640RC	............................... 708640C/708641RC
Blower Wheel Diameter		9.5”	.......................................................... 9.5"
Sound Rating at 3 feet		65-70 dB	..................................................65-70 dB
Hose Diameter		4"	............................................................. 4"
Bag Diameter		14”	........................................................... 14"
Filter and Collector Bag Length		31.5”/21.6”	........................................................ 33.5”
Collector Bag Capacity (cu ft):		2.1	........................................................... 2.1
Air Flow @ 4” (CFM):		650	.......................................................... 650
Max. Static Pressure (inch of water):		..................................................... 6.5	........................................................... 6.5
Velocity @ 4” (FPM):		6,300	....................................................... 6,300
Overall Dimensions:		26.4”x14”x56.7”	.............................26-1/2” x 14” x 61-1/2”
Motor (TEFC):	1 HP, 1Ph, 115V/230V, Prewired 115V		......1 HP, 1Ph 115/230V, Prewired 115V
Net Weight (lbs):		69	............................................................ 84
Gross weight (lbs):		74	............................................................ 87

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6