Jet Tools DC-650ARC, DC-650CRC operating instructions Unpacking, Contents of the Shipping Carton

Unpacking

1.Remove all contents from the shipping carton.

2.Report any damage to your distributor.

3.Do not discard any shipping material until after the dust collector has been assembled and is running properly.

Contents of the Shipping Carton

DC-650A Contents

1 – Base

1 – Owner's Manual

1 – Warranty Card

1 – Motor Assembly

1 – Motor Cooling Fan

1 – Collector Bag

1 – Filter Bag

4 – Casters

1 – Support Cylinder

1 – Retaining Strap

1 – Filter Bag Support Rod

1 – Bag of Assembly Hardware

4 – M6 x 12 Cap Screws

5 – M6 Lock Washers

5 – M6 Flat Washers

2 – 3/8"-16 Acorn Nuts

2 – 3/8" Hex Nuts

4 – M10 Flat Washers

4 – M8 x 12 Cap Screws

4 – M8 Flat Washers

1 – M6 Hex Nut

Tools Required for Assembly

214mm Wrenches or Sockets

110mm Wrench or Socket

DC-650C Contents

Canister Filter Box

1 – Canister Filter

1 – Handle

1 – Bag of Hardware for Handles

2 – M10 Hex Nuts

2 – M10 Flat Washers

1 – M10 Lock Washer

4 – Knobs

1 – M8 Hex Nut

1 – M8 Flat Washer

1 – M8 Lock Washer

DC-650C Box

1 – Base

1 – Owner's Manual

1 – Warranty Card

1 – Motor Assembly

1 – Motor Cooling Fan

5 – Collector Bags

1 – Snap Ring

4 – Casters

1 – Support Cylinder

1 – Bag of Assembly Hardware

4 – M6 x 12 Cap Screws

4 – M6 Lock Washers

4 – M6 Flat Washers

2 – 3/8"-16 Acorn Nuts

2 – 3/8" Hex Nuts

4 – M10 Flat Washers

4 – M8 x 12 Cap Screws

4 – M8 Flat Washers

Tools Required for Assembly

214mm Wrenches or Sockets

110mm Wrench or Socket

117mm Wrench

Read and understand the entire contents of this manual before attempting set-up or operation! Failure to comply may cause serious injury.

7