Jabra BT2010 Troubleshooting & FAQ, Hear crackling noises, Cannot hear anything in my headset

Page 11

Troubleshooting & FAQ

I hear crackling noises

For the best audio quality, always wear your headset on the same side of the body as your mobile phone.

I cannot hear anything in my headset

Increase the volume on the headset.

Ensure that the headset is paired with the phone.

Make sure that the phone is connected to the headset – if it does not connect either from the phone’s Bluetooth menu or by tapping the answer/end button, follow the pairing proce- dure (refer to pairing section in this user manual).

You can determine whether your headset is connected to a de- vice by looking at the flashes on the headset after tapping the answer/end button when the headset is on: single slow flashes means that the headset is connected to a device, double slow

flashes means that the headset is currently not connected.

I have connection problems

You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions; refer to this sec- tion in this user manual.

You can determine whether your headset is connected to a de- vice by looking at the flashes on the headset after tapping the answer/end button when the headset is on: single slow flashes means that the headset is connected to a device, double slow

flashes means that the headset is currently not connected.

Will the JabraBT2010 work with other Bluetooth equipment?

The Jabra BT2010 is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1, 1.2 or 2.0 and support a headset and/or hands-free Bluetooth profile.

I cannot use Reject call, Call on hold, Redial or Voice dialling

These functions are dependent on your phone supporting them. Please check your phone’s manual for further details.

english

Jabra BT2010 Bluetooth headset

10

 

Image 11
Contents Page English EnglishLight indicater LED Answer/end button Off/onbutton Thank you About your Jabra BT2010Your Jabra BT2010 lets you do all this SpecificationsWhat your headset can do Instruction Duration of press Charge your headsetTurning your headset on and off Pairing it with your phonePut the headset in pairing mode Set your Bluetooth phone to ‘discover’ the Jabra BT2010Keep holding down the button until light is constant Your phone will find the Jabra BT2010Wear it how you like it How to… What you see What this means about your Headset What the lights meanCall waiting and placing a call on hold Hear crackling noises Troubleshooting & FAQHave connection problems Will the JabraBT2010 work with other Bluetooth equipment?Taking care of your headset Need more help?ACA TS028 Ignition of flammable atmospheres During the use of this productKeep out of reach of children Claims under the Warranty WarrantyService and Warranty Information Limitation of Warranty FCC Certification and safety approvalsIndustry Canada BluetoothGlossary 32-00392 B