Product service Troubleshooting guide | Panasonic SH-FX67 manual

Product service

Troubleshooting guide

RQTX0125 Product service / Maintenance / Troubleshooting guide

1Damage requiring service—The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system.

Product information

For product information or assistance with product operation:

In the U.S.A., refer to “Customer Services Directory” on page 13.

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

Maintenance

Clean this unit with a soft, dry cloth.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, refer to “Customer Services Directory” on page 13 if you reside in the U.S.A., or refer to “Product information” on the left if you reside in Canada.

On your home theater unit

The wireless link	≥There is no link between the home theater
indicator	unit and the wireless system. Turn the
(e.g. “ [W1] ” or an	wireless system off and then back on.
indicator) is flashing.	Alternatively, turn the wireless system off,
	disconnect the AC power supply cord, and
	then reconnect it.
The wireless link	≥Check that the home theater unit is turned
indicator	on, and the wireless system is turned on.
(e.g. “ [W1] ” or an	≥Ensure that the digital transmitter is fully
indicator) does not	inserted into the slot of the home theater
light.	unit.