Panasonic SC-ZT2 warranty Setting surround speakers

Page 15

Setting surround speakers

„Link the front speakers wirelessly first and then make the settings for the surround speakers. Preparations

•Make sure that all equipment has been turned off.

(When the VIERA Link “HDAVI Control” compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are connected, do not turn on the TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.)

•Connect AC power supply of main unit and 4 speakers to household main sockets. (➜ page 12)

•Make sure that the main unit and speakers have been turned off.

•Prepare the remote control. (➜ page 7)

1.Turn the main unit on.

2.Turn on the front speakers.

•The color of the [WIRELESS LINK] indicator of the front speaker changes from red to green.

•Do not turn on the surround speakers yet at this point. The color of the [WIRELESS LINK] indicator does not change from red to green even if the power is turned on.

3.Set “4CH ” at the setting operation of “Changing the number of speakers to 4” below.

4.Turn the main unit off once.

5.Turn the main unit on again.

•“4CH SEARCH ” appears on the display. (This is displayed only at the first-time setting.)

6.Turn on the surround speakers.

•The color of the [WIRELESS LINK] indicator of the surround speaker changes from red to green.

•When the [WIRELESS LINK] indicator of each speaker lights green, “4CH SEARCH ” display disappears.

7.Press and hold [CH] on the remote control for about 3 seconds until “4 SPKR SET ” is displayed on the main unit’s display.

•Always aim the remote control at the main unit for operation.

8.Press the remote control button corresponding to the speaker outputting the confirmation sound.

Connection

Front speaker (left)

Surround speaker (left)

Front speaker (right)

Surround speaker (right)

When the sound is output from the front speaker (left), press [GAME].

When the sound is output from the surround speaker (left), press [–SETUP, OFF].

GAMEMUTE

–SETUP,

OFF RETURN

When the sound is output from the front speaker (right), press [MUTE].

When the sound is output from the surround speaker (right), press [ RETURN].

Speaker setting

•Sound is output from any of the speakers.

•When you press the button corresponding to the confirmation sound of a speaker, another speaker outputs the confirmation sound. Press the corresponding button in the same way and complete settings for all 4 speakers.

•When “COMPLETE ” disappears from the main unit’s display, the speaker setting is complete.

Note

•Check if the speakers are properly set after setting the speakers. (➜ page 14)

•If the speakers are set incorrectly in step 8, turn the main unit off then on again and perform steps 7 and 8.

•If the [WIRELESS LINK] indicator does not change from red to green, see page 27 of “Troubleshooting guide”.

Changing the number of speakers to 4

„To return to the previous display/To cancel during setting operation: Press [ RETURN].

1. Press and hold [–SETUP, OFF] for about 2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “SPEAKERS ” and press [OK].

3.Press [e][r] to select “4CH ” and press [OK].

2CH : When only front speakers are installed (factory setting)

4CH : When surround speakers are additionally installed

•When changing the number of speakers to 2, select “2CH ” and press [OK].

4.Press [e][r] to select “YES ” and press [OK].

•To cancel, select “NO ”.

5.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Note

When you select “EXIT ” and press [OK] in step 2, the setting mode finishes.

15

VQT2R70

Page 14 Page 16
Image 15
Page 14 Page 16
Contents If you have any questions contact Warranty can be found onMain unit control box part SpeakersImportant Safety Instructions Table of contents Enjoying movies and music Setting up your Home Theater systemInstalling the speakers Setting the speakersFront view Supplied accessoriesControl guide Main unit Control boxRear view Base woofer part For switching the speaker ID switch ON/OFFControl guide Speaker with built-in amplifierInserting the batteries Remote control preparationRemote control Using the remote control„ Restrictions for use InstallationWireless functions „ Equipment certificationBasic connections „ Hdmi cable notes„ Enjoying only with TV speaker Connecting STB etc Setting for automatically switching the input source to STBHome Theater connections DVD player VCR, etc Digital audio out opticalVideo cable Audio cableTo connect audio equipment CD player, etc AC power supply connectionOther connections To connect a second set of equipment that supports HdmiTurn 2 speakers on Speaker settingSetting the speakers Turn the main unit onPress Test on the remote control to stop the test signal Speaker settingChecking the speaker setting Installing surround speakersSetting surround speakers Main unit of this system Aim the remote control towardSignal sensor page 7 on Enjoying movies and musicEnjoying sound field effects This system supports Hdavi Control 4 function Using the Viera Link Hdavi ControlWhat you can do with Viera Link Hdavi Control You can select Speaker Selection Home Cinema or TVMake sure to connect to Out optical Main unitHdmi input Viera Link Hdavi Control Compatible EquipmentAdjusting the bass woofer part output Functions and settingsUsing WHISPER-MODE Surround Using GameAdjusting the volume balance of front speakers Adjusting sound qualityPress er to select the distance and press OK Functions and settingsSetting distances Setting 7.1-channel virtual surroundSwitching the attenuator Viera Link Hdavi Control settingSwitching between dual sounds Clear audio at low volumeInput TV, DVD, AUX1, AUX2 Switching the input signal detection settingReset factory settings „ Repeat steps 3 and 4 to change settingDisplay Check point/Cause/Countermeasure Pages Error messagesUsing with headphones SpecificationsTroubleshooting guide Maintenance Digital signals that can be played on this systemGlossary Dolby Laboratories If you see this symbolProduct information User memoPanasonic Home Audio Products Limited Warranty Limited Warranty only for U.S.A. and Puerto RicoLimited Warranty only for Canada Panasonic Corporation Safety precautionsFCC Note Corporation of North America
Related manuals
Manual 32 pages 62.63 Kb Manual 32 pages 62.51 Kb

SC-ZT2 specifications

The Panasonic SC-ZT2 is an innovative soundbar system that brings an immersive audio experience to any home entertainment setup. Designed to complement the modern living space, this sleek soundbar not only delivers high-quality sound but also integrates advanced technologies that enhance its performance.

One of the standout features of the SC-ZT2 is its unique 3D surround sound technology. This system utilizes Panasonic's proprietary Drivers and Advanced Digital Signal Processing (DSP) to create a spatial audio experience that fills the room. This technology allows users to enjoy movies, music, and games with a depth and clarity that traditional soundbars often struggle to achieve.

The SC-ZT2 boasts a powerful output, with its built-in subwoofers providing deep bass response that enhances the overall audio experience. This feature is particularly appealing for action movie enthusiasts and music lovers who crave that extra punch in their sound. The design of the soundbar is also noteworthy, blending seamlessly into contemporary interiors while providing robust build quality.

Connectivity is another area where the SC-ZT2 shines. It supports Bluetooth, allowing users to wirelessly stream music from their smartphones and tablets. Additionally, the soundbar is equipped with HDMI ARC (Audio Return Channel) which simplifies connections with compatible TVs, making setup quick and convenient. For those who prefer wired connections, the SC-ZT2 includes optical and auxiliary input options.

The SC-ZT2 features a user-friendly interface, with intuitive controls that make it easy for anyone to adjust settings or switch between input sources. With its built-in voice assistant compatibility, users can also control the soundbar using voice commands, adding to its convenience.

In terms of sound quality, the SC-ZT2 excels with rich midrange tones and clear highs, ensuring that dialogues remain crisp and intelligible, even in the loudest scenes. This soundbar also supports various audio formats, providing versatility for different content types.

Overall, the Panasonic SC-ZT2 represents a perfect blend of performance and design, making it an excellent choice for anyone looking to elevate their home audio experience. With its advanced technologies, powerful sound, and sleek aesthetics, it is a compelling addition to any home theater setup.
Top Page Image Contents