Panasonic SC-ZT2 warranty Functions and settings, Using WHISPER-MODE Surround, Using Game, Muting

Page 20

Functions and settings

Using “WHISPER-MODE SURROUND”

Functions and settings

To return to the previous display/ To cancel during setting operation (➜ page 21): Press [ RETURN].

Play

This function is effective during surround playback only. You can enjoy the dynamic effect even if the sound volume level is low during surround playback.

Press [WHISPER-MODE SURROUND] to select “W.S. ON ”.

•The current setting is displayed first.

Each time you press, the setting switches between “W.S. OFF ” and “W.S. ON ”.

„To cancel Press [WHISPER-MODE SURROUND] to select “W.S. OFF ”.

Note

WHISPER-MODE SURROUND is not effective in the following cases. When not using the surround speakers:

When Dolby Virtual Speaker is off. When using the surround speakers:

When Dolby Pro Logic and SFC are off with 2-channel signal input.

If the above setting is made when this function is on, this function temporarily becomes off.

Using “GAME”

Enjoy gaming with more dynamic sound.

Press [GAME].

• “GAME ” mode (➜ page 17) in SFC is selected.

„ To cancel Press again.

If canceled, SFC’s effect itself is canceled.

Muting

“MUTE ” blinks on the display while the volume is muted.

Press [MUTE].

„ To cancel

Press again.

Note

•Muting is canceled when you switch the system to Standby.

•Muting is also canceled when you adjust the volume.

Adjusting the bass (woofer part) output

When you feel the bass volume is not balanced with the volume of the front speakers, you can adjust the bass during playback.

1. Press [CH] to select “WFR ”.

(The speaker is switched each time you press the button.)

WFR (woofer) → RS (surround right) (when used) → LS (surround left) (when used)

2. Press [SPEAKER LEVEL +, –] to adjust the bass volume.

Adjustment range: MIN, 1 to 15, MAX

Adjusting the surround speaker output

When using the surround speakers, you can adjust them, too.

1. Press [CH] to select “RS ” or “LS ”.

(The speaker is switched each time you press the button.)

WFR (woofer) → RS (surround right) (when used) → LS (surround left) (when used)

2. Press [SPEAKER LEVEL +, –] to adjust the volume of each speaker.

Adjustment range: –10to +10

„Repeat steps 1 and 2 to adjust the level of each speaker.

 

 

Note

 

• You cannot adjust the front speakers with this operation. To adjust the volume balance of left

 

 

and right front speakers, see “Adjusting the volume balance of front speakers”. (➜ page 21)

 

•

If the sound is distorted, lower the level.

 

•

You cannot adjust the output level of speakers if the sound field effect is off and the

 

 

speaker’s audio output is set to off. (➜ page 17)

 

•

You can adjust the speaker’s output level in each SFC mode respectively. (➜ page 17)

 

•

When a commercially available active subwoofer is connected to the subwoofer output

 

 

terminal on this unit’s rear panel, the subwoofer is synchronized with the unit and the

20

 

 

sound volume is adjusted.

 

 

 

VQT2R70

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Warranty can be found on Main unit control box partSpeakers If you have any questions contactImportant Safety Instructions Table of contents Setting up your Home Theater system Installing the speakersSetting the speakers Enjoying movies and musicSupplied accessories Control guideMain unit Control box Front viewBase woofer part For switching the speaker ID switch ON/OFF Control guideSpeaker with built-in amplifier Rear viewRemote control preparation Remote controlUsing the remote control Inserting the batteriesInstallation Wireless functions„ Equipment certification „ Restrictions for use„ Enjoying only with TV speaker Basic connections„ Hdmi cable notes Home Theater connections Connecting STB etcSetting for automatically switching the input source to STB Digital audio out optical Video cableAudio cable DVD player VCR, etcAC power supply connection Other connectionsTo connect a second set of equipment that supports Hdmi To connect audio equipment CD player, etcSpeaker setting Setting the speakersTurn the main unit on Turn 2 speakers onSpeaker setting Checking the speaker settingInstalling surround speakers Press Test on the remote control to stop the test signalSetting surround speakers Aim the remote control toward Signal sensor page 7 onEnjoying movies and music Main unit of this systemEnjoying sound field effects Using the Viera Link Hdavi Control What you can do with Viera Link Hdavi ControlYou can select Speaker Selection Home Cinema or TV This system supports Hdavi Control 4 functionOut optical Main unit Hdmi inputViera Link Hdavi Control Compatible Equipment Make sure to connect toFunctions and settings Using WHISPER-MODE SurroundUsing Game Adjusting the bass woofer part outputAdjusting sound quality Adjusting the volume balance of front speakersFunctions and settings Setting distancesSetting 7.1-channel virtual surround Press er to select the distance and press OKViera Link Hdavi Control setting Switching between dual soundsClear audio at low volume Switching the attenuatorSwitching the input signal detection setting Reset factory settings„ Repeat steps 3 and 4 to change setting Input TV, DVD, AUX1, AUX2Error messages Using with headphonesSpecifications Display Check point/Cause/Countermeasure PagesTroubleshooting guide Digital signals that can be played on this system MaintenanceGlossary If you see this symbol Product informationUser memo Dolby LaboratoriesLimited Warranty only for U.S.A. and Puerto Rico Panasonic Home Audio Products Limited WarrantyLimited Warranty only for Canada Safety precautions FCC NoteCorporation of North America Panasonic Corporation
Related manuals
Manual 32 pages 62.63 Kb Manual 32 pages 62.51 Kb

SC-ZT2 specifications

The Panasonic SC-ZT2 is an innovative soundbar system that brings an immersive audio experience to any home entertainment setup. Designed to complement the modern living space, this sleek soundbar not only delivers high-quality sound but also integrates advanced technologies that enhance its performance.

One of the standout features of the SC-ZT2 is its unique 3D surround sound technology. This system utilizes Panasonic's proprietary Drivers and Advanced Digital Signal Processing (DSP) to create a spatial audio experience that fills the room. This technology allows users to enjoy movies, music, and games with a depth and clarity that traditional soundbars often struggle to achieve.

The SC-ZT2 boasts a powerful output, with its built-in subwoofers providing deep bass response that enhances the overall audio experience. This feature is particularly appealing for action movie enthusiasts and music lovers who crave that extra punch in their sound. The design of the soundbar is also noteworthy, blending seamlessly into contemporary interiors while providing robust build quality.

Connectivity is another area where the SC-ZT2 shines. It supports Bluetooth, allowing users to wirelessly stream music from their smartphones and tablets. Additionally, the soundbar is equipped with HDMI ARC (Audio Return Channel) which simplifies connections with compatible TVs, making setup quick and convenient. For those who prefer wired connections, the SC-ZT2 includes optical and auxiliary input options.

The SC-ZT2 features a user-friendly interface, with intuitive controls that make it easy for anyone to adjust settings or switch between input sources. With its built-in voice assistant compatibility, users can also control the soundbar using voice commands, adding to its convenience.

In terms of sound quality, the SC-ZT2 excels with rich midrange tones and clear highs, ensuring that dialogues remain crisp and intelligible, even in the loudest scenes. This soundbar also supports various audio formats, providing versatility for different content types.

Overall, the Panasonic SC-ZT2 represents a perfect blend of performance and design, making it an excellent choice for anyone looking to elevate their home audio experience. With its advanced technologies, powerful sound, and sleek aesthetics, it is a compelling addition to any home theater setup.
Top Page Image Contents