Panasonic SC-ZT2 Speaker setting, Checking the speaker setting, Installing surround speakers

Page 14

Connection

Speaker setting

When the speakers are detected, the Wireless Link display lights up on the main unit’s display.

 

 

Display

 

 

 

 

 

 

 

 

 

 

(Blinks during detecting operation.)

W

 

 

Wireless Link

While the wireless speakers operate normally, the Wireless Link display lights, but when radio

 

 

 

 

 

display

waves are interrupted (When speakers are in Standby condition, etc.), it blinks.

 

 

 

 

 

 

 

 

 

 

•When you turn the main unit off with the speakers on, the speakers automatically enter Standby (Wireless Link Standby). The color of the [WIRELESS LINK] indicator turns to red.

•To reduce more of the power consumption of speakers in Standby, turn the speakers off. The speakers enter Standby (In Standby condition). <Power consumption of speakers in Standby>

Wireless Link Standby: approx. 0.8 W (per 1 speaker)

In Standby condition: approx. 0.1 W (per 1 speaker)

Checking the speaker setting

1.

Turn the main unit on.

• To adjust the speaker volume, press [VOL

+, –].

2.

Press [TEST] on the remote

 

 

 

control to output the test

Press

 

 

signal.

 

 

 

 

3. Make sure that the display of main unit matches speaker locations.

The test signal is output from one speaker at a time for about 2 seconds in the order shown below. “TEST L ” → “TEST R ” → “TEST RS ” ✽ → “TEST LS ” ✽

Speaker setting

„Confirm the correct setting locations in the following chart.

Display

Speaker outputting the test signal

 

 

TEST L

Front left

 

 

TEST R

Front right

 

 

TEST RS ✽

Surround right (right back)

TEST LS ✽

Surround left (left back)

Note

✽Displayed only when using the surround speakers.

If the speakers are not properly set, do either of the following.

•Move the speakers according to the unit’s display.

•Perform steps 3 and 4 of “Setting the speakers” (➜ page 13). When using the surround speakers, perform steps 7 and 8 of “Setting surround speakers” (➜ page 15).

4.Press [TEST] on the remote control to stop the test signal.

If the speaker is repaired or replaced

Perform the above “Checking the speaker setting” to confirm that the speaker properly operates.

Do the following operations if the sound is not produced normally:

1.Press and hold [INPUT SELECTOR] on the main unit about 3 seconds until “2CH SEARCH ” is displayed.

2.Perform steps 2 to 4 of “Setting the speakers” (➜ page 13).

Installing surround speakers

The surround speakers are not included.

You can enjoy more dynamic surround playback with this system by installing Panasonic surround speakers SB-ZT1/SB-ZT2.

14

Setup example

Front speaker

 

Front speaker

(right)

 

(left)

 

Connected equipment

 

 

Main unit

 

Surround

 

 

speaker

Approx. 120°

 

(left)

 

Surround speaker (right)

•The optional speakers can be purchased at the shop where you bought this system.

•Confirm the color of the front speaker before buying the optional speakers.

When the front speaker is black: SB-ZT2PP-K

When the front speaker is silver: SB-ZT1PP-S

•Place them slightly at the back right and left of the listening-viewing position.

•There is no positional distinction for each speaker before setting.

•Aim the front face (with Panasonic logo) of each speaker at the listening- viewing position for setting.

Note

Set the distance from each speaker to the listening-viewing position. (➜ page 22)

VQT2R70

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Speakers Warranty can be found onMain unit control box part If you have any questions contactImportant Safety Instructions Table of contents Setting the speakers Setting up your Home Theater systemInstalling the speakers Enjoying movies and musicMain unit Control box Supplied accessoriesControl guide Front viewSpeaker with built-in amplifier Base woofer part For switching the speaker ID switch ON/OFFControl guide Rear viewUsing the remote control Remote control preparationRemote control Inserting the batteries„ Equipment certification InstallationWireless functions „ Restrictions for use„ Enjoying only with TV speaker Basic connections„ Hdmi cable notes Home Theater connections Connecting STB etcSetting for automatically switching the input source to STB Audio cable Digital audio out opticalVideo cable DVD player VCR, etcTo connect a second set of equipment that supports Hdmi AC power supply connectionOther connections To connect audio equipment CD player, etcTurn the main unit on Speaker settingSetting the speakers Turn 2 speakers onInstalling surround speakers Speaker settingChecking the speaker setting Press Test on the remote control to stop the test signalSetting surround speakers Turn Aim the remote control towardEnjoying movies and music Main unit of this systemEnjoying sound field effects You can select Speaker Selection Home Cinema or TV Using the Viera Link Hdavi ControlWhat you can do with Viera Link Hdavi Control This system supports Hdavi Control 4 functionViera Link Hdavi Control Compatible Equipment Out optical Main unitHdmi input Make sure to connect toUsing Game Functions and settingsUsing WHISPER-MODE Surround Adjusting the bass woofer part outputAdjusting sound quality Adjusting the volume balance of front speakersSetting 7.1-channel virtual surround Functions and settingsSetting distances Press er to select the distance and press OKClear audio at low volume Viera Link Hdavi Control settingSwitching between dual sounds Switching the attenuator„ Repeat steps 3 and 4 to change setting Switching the input signal detection settingReset factory settings Input TV, DVD, AUX1, AUX2Specifications Error messagesUsing with headphones Display Check point/Cause/Countermeasure PagesTroubleshooting guide Digital signals that can be played on this system MaintenanceGlossary User memo If you see this symbolProduct information Dolby LaboratoriesLimited Warranty only for U.S.A. and Puerto Rico Panasonic Home Audio Products Limited WarrantyLimited Warranty only for Canada Corporation of North America Safety precautionsFCC Note Panasonic Corporation
Related manuals
Manual 32 pages 62.63 Kb Manual 32 pages 10.56 Kb

SC-ZT2 specifications

The Panasonic SC-ZT2 is an innovative soundbar system that brings an immersive audio experience to any home entertainment setup. Designed to complement the modern living space, this sleek soundbar not only delivers high-quality sound but also integrates advanced technologies that enhance its performance.

One of the standout features of the SC-ZT2 is its unique 3D surround sound technology. This system utilizes Panasonic's proprietary Drivers and Advanced Digital Signal Processing (DSP) to create a spatial audio experience that fills the room. This technology allows users to enjoy movies, music, and games with a depth and clarity that traditional soundbars often struggle to achieve.

The SC-ZT2 boasts a powerful output, with its built-in subwoofers providing deep bass response that enhances the overall audio experience. This feature is particularly appealing for action movie enthusiasts and music lovers who crave that extra punch in their sound. The design of the soundbar is also noteworthy, blending seamlessly into contemporary interiors while providing robust build quality.

Connectivity is another area where the SC-ZT2 shines. It supports Bluetooth, allowing users to wirelessly stream music from their smartphones and tablets. Additionally, the soundbar is equipped with HDMI ARC (Audio Return Channel) which simplifies connections with compatible TVs, making setup quick and convenient. For those who prefer wired connections, the SC-ZT2 includes optical and auxiliary input options.

The SC-ZT2 features a user-friendly interface, with intuitive controls that make it easy for anyone to adjust settings or switch between input sources. With its built-in voice assistant compatibility, users can also control the soundbar using voice commands, adding to its convenience.

In terms of sound quality, the SC-ZT2 excels with rich midrange tones and clear highs, ensuring that dialogues remain crisp and intelligible, even in the loudest scenes. This soundbar also supports various audio formats, providing versatility for different content types.

Overall, the Panasonic SC-ZT2 represents a perfect blend of performance and design, making it an excellent choice for anyone looking to elevate their home audio experience. With its advanced technologies, powerful sound, and sleek aesthetics, it is a compelling addition to any home theater setup.
Top Page Image Contents