Panasonic SC-ZT2 Functions and settings, Setting distances, Setting 7.1-channel virtual surround

Page 22

Functions and settings

Setting distances

Functions and settings

Play

To return to the previous display/ To cancel during setting operation: Press [ RETURN].

You can make this setting when using the surround speakers. This setting is not displayed under different conditions.

By setting the distance from front/surround speakers to the listening-viewing position, the sound delay time is automatically calculated and adjusted so that sound reaches the listener at the same time.

1. Press and hold [–SETUP, OFF] for about 2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “DISTANCE ” and press [OK].

3.Press [w][q] to select a speaker to set and press [OK].

FRONT : Front speakers

SURR : Surround speakers

4. Press [e][r] to select the distance and press [OK].

Adjustment range: 1.0 to 10.0 meter (3.0 to 30.0 ft (feet))

Factory setting: Front 3.0 meter (10.0 ft (feet))

Surround 1.5 meter (5.0 ft (feet))

5.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Note

Radio waves from this system reach the maximum range of 15 m (49 feet) within the same room.

Setting 7.1-channel virtual surround

When playing back 7.1-channel LPCM signals, you can enjoy wider sound field effects as if another speaker is added. Factory setting is “AUTO ”.

When you do not want to use 7.1-channel virtual surround effect, select “OFF ” in this setting.

1. Press and hold [–SETUP, OFF] for about 2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “7.1CH VS ” and press [OK].

3.Press [e][r] to select “OFF ” and press [OK].

AUTO : The setting is switched between ON and OFF depending on the input signals.

Only when 7.1-channel LPCM signals are input, 7.1-channel virtual surround is ON (When other signals are input, this setting is OFF).

OFF : 7.1-channel virtual surround is always OFF.

Factory setting: AUTO

4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

Reducing Standby power consumption (In Standby condition (HDMI off mode))

Standby through function (➜ pages 9, 28) does not work in this mode if you have connected through the HDMI terminal.

VIERA Link “HDAVI Control” (➜ page 18) will not function when this system is off.

1. Press and hold [–SETUP, OFF] for about 2 seconds.

The setting items are displayed. (➜ page 21)

2.Press [w][q] to select “HDMI ” and press [OK].

3.Press [w][q] to select “STNBY ” and press [OK].

4.Press [e][r] to select “OFF ” and press [OK].

OFF : Standby power consumption reduced (approx. 0.2 W)

ON : “Standby through” is activated when this system is turned off. (Normal power consumption)

Factory setting: ON

5.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.

22

VQT2R70

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Speakers Warranty can be found onMain unit control box part If you have any questions contactImportant Safety Instructions Table of contents Setting the speakers Setting up your Home Theater systemInstalling the speakers Enjoying movies and musicMain unit Control box Supplied accessoriesControl guide Front viewSpeaker with built-in amplifier Base woofer part For switching the speaker ID switch ON/OFFControl guide Rear viewUsing the remote control Remote control preparationRemote control Inserting the batteries„ Equipment certification InstallationWireless functions „ Restrictions for use„ Hdmi cable notes Basic connections„ Enjoying only with TV speaker Setting for automatically switching the input source to STB Connecting STB etcHome Theater connections Audio cable Digital audio out opticalVideo cable DVD player VCR, etcTo connect a second set of equipment that supports Hdmi AC power supply connectionOther connections To connect audio equipment CD player, etcTurn the main unit on Speaker settingSetting the speakers Turn 2 speakers onInstalling surround speakers Speaker settingChecking the speaker setting Press Test on the remote control to stop the test signalSetting surround speakers Turn Aim the remote control towardEnjoying movies and music Main unit of this systemEnjoying sound field effects You can select Speaker Selection Home Cinema or TV Using the Viera Link Hdavi ControlWhat you can do with Viera Link Hdavi Control This system supports Hdavi Control 4 functionViera Link Hdavi Control Compatible Equipment Out optical Main unitHdmi input Make sure to connect toUsing Game Functions and settingsUsing WHISPER-MODE Surround Adjusting the bass woofer part outputAdjusting sound quality Adjusting the volume balance of front speakersSetting 7.1-channel virtual surround Functions and settingsSetting distances Press er to select the distance and press OKClear audio at low volume Viera Link Hdavi Control settingSwitching between dual sounds Switching the attenuator„ Repeat steps 3 and 4 to change setting Switching the input signal detection settingReset factory settings Input TV, DVD, AUX1, AUX2Specifications Error messagesUsing with headphones Display Check point/Cause/Countermeasure PagesTroubleshooting guide Digital signals that can be played on this system MaintenanceGlossary User memo If you see this symbolProduct information Dolby LaboratoriesLimited Warranty only for U.S.A. and Puerto Rico Panasonic Home Audio Products Limited WarrantyLimited Warranty only for Canada Corporation of North America Safety precautionsFCC Note Panasonic Corporation
Related manuals
Manual 32 pages 62.63 Kb Manual 32 pages 10.56 Kb

SC-ZT2 specifications

The Panasonic SC-ZT2 is an innovative soundbar system that brings an immersive audio experience to any home entertainment setup. Designed to complement the modern living space, this sleek soundbar not only delivers high-quality sound but also integrates advanced technologies that enhance its performance.

One of the standout features of the SC-ZT2 is its unique 3D surround sound technology. This system utilizes Panasonic's proprietary Drivers and Advanced Digital Signal Processing (DSP) to create a spatial audio experience that fills the room. This technology allows users to enjoy movies, music, and games with a depth and clarity that traditional soundbars often struggle to achieve.

The SC-ZT2 boasts a powerful output, with its built-in subwoofers providing deep bass response that enhances the overall audio experience. This feature is particularly appealing for action movie enthusiasts and music lovers who crave that extra punch in their sound. The design of the soundbar is also noteworthy, blending seamlessly into contemporary interiors while providing robust build quality.

Connectivity is another area where the SC-ZT2 shines. It supports Bluetooth, allowing users to wirelessly stream music from their smartphones and tablets. Additionally, the soundbar is equipped with HDMI ARC (Audio Return Channel) which simplifies connections with compatible TVs, making setup quick and convenient. For those who prefer wired connections, the SC-ZT2 includes optical and auxiliary input options.

The SC-ZT2 features a user-friendly interface, with intuitive controls that make it easy for anyone to adjust settings or switch between input sources. With its built-in voice assistant compatibility, users can also control the soundbar using voice commands, adding to its convenience.

In terms of sound quality, the SC-ZT2 excels with rich midrange tones and clear highs, ensuring that dialogues remain crisp and intelligible, even in the loudest scenes. This soundbar also supports various audio formats, providing versatility for different content types.

Overall, the Panasonic SC-ZT2 represents a perfect blend of performance and design, making it an excellent choice for anyone looking to elevate their home audio experience. With its advanced technologies, powerful sound, and sleek aesthetics, it is a compelling addition to any home theater setup.
Top Page Image Contents