Panasonic SC-ZT2 warranty Installation, Wireless functions, „ Equipment certification

Page 8

Installation

Connection

Setup example

•Aim the front face (with Panasonic logo) of each speaker at the listening-viewing position for setting.

Front speaker

Front speaker

(right)

(left)

 

Connected equipment

 

Main unit

 

„There is no positional distinction for each speaker before setting.

„Make sure to place the speakers on a flat, stable surface so there is no danger of them falling over.

„When carrying speakers, hold the pole and base parts (➜ page 6).

„The speakers of this system are not magnetically shielded.

Do not install this system near a CRT-based television.

Note

•Make sure the base parts are not covered by cloth such as a curtain.

•Before attaching the leg cushion (included) on the base parts to prevent tilt or rattle on the floor, make sure there are no people in the surrounding area.

•If the main unit is placed at the height of 50 cm (1.6 feet) or below from the floor, the radio waves reach a smaller range.

•Do not install other equipment directly on or under the main unit.

Installation

Wireless functions

As this system uses a frequency band of 2.4 GHz, the radio waves may be interrupted by an obstacle. Depending on the surrounding environment (i.e. radio wave interruption from outside, etc.) or the building structure where this system is used (i.e. wall that easily reflects radio waves, etc.), sounds may be cut or noise may occur.

Install this system properly paying attention to the following descriptions.

„Equipment certification

As this system received Technical Conditions compliance certification based on the Radio Law, the wireless station license is not required. However, if you do the following actions to this system, you may be held accountable by law.

• Disassemble or refurbish

„Restrictions for use

•Domestic use only.

•Use this system in the same room.

„Do not place an obstacle between the main unit and speakers.

Radio waves from this system reach a maximum range of 15 m (49 feet) in the same room. If there is an obstacle between the main unit and speakers or the main unit is placed at the height of 50 cm (1.6 feet) or below from the floor, the radio waves reach a smaller range.

„Keep this system away from equipment that generates radio wave interference.

If the following equipment is located near the system, install this system away from such equipment.

•Bluetooth, OA devices, telephone, etc.: approx. 3 m (10 feet) or more.

•Microwave oven, wireless LAN compatible devices: approx. 3 m (10 feet) or more.

This system is designed to automatically avoid radio wave interference with such household equipment. If radio wave interference occurs, the Wireless Link display (➜ page 14) may blink, the sounds from speakers may be interrupted or noise may occur.

These phenomena occur when this system selects a proper frequency. These are not malfunctions.

„Keep this system away from metal objects that tend to reflect radio waves.

If there are metal objects or furniture in the room where this system is installed, radio waves tend to be reflected. Depending on the listening-viewing position, sounds may be interrupted or noise may occur. These symptoms may be remedied by slightly moving this system’s position.

Note that radio waves tend to be reflected also when this system is installed in rooms with a lot of activity.

8

VQT2R70

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Warranty can be found on Main unit control box partSpeakers If you have any questions contactImportant Safety Instructions Table of contents Setting up your Home Theater system Installing the speakersSetting the speakers Enjoying movies and musicSupplied accessories Control guideMain unit Control box Front viewBase woofer part For switching the speaker ID switch ON/OFF Control guideSpeaker with built-in amplifier Rear viewRemote control preparation Remote controlUsing the remote control Inserting the batteriesInstallation Wireless functions„ Equipment certification „ Restrictions for use„ Enjoying only with TV speaker Basic connections„ Hdmi cable notes Home Theater connections Connecting STB etcSetting for automatically switching the input source to STB Digital audio out optical Video cableAudio cable DVD player VCR, etcAC power supply connection Other connectionsTo connect a second set of equipment that supports Hdmi To connect audio equipment CD player, etcSpeaker setting Setting the speakersTurn the main unit on Turn 2 speakers onSpeaker setting Checking the speaker settingInstalling surround speakers Press Test on the remote control to stop the test signalSetting surround speakers Aim the remote control toward Enjoying movies and musicTurn Main unit of this systemEnjoying sound field effects Using the Viera Link Hdavi Control What you can do with Viera Link Hdavi ControlYou can select Speaker Selection Home Cinema or TV This system supports Hdavi Control 4 functionOut optical Main unit Hdmi inputViera Link Hdavi Control Compatible Equipment Make sure to connect toFunctions and settings Using WHISPER-MODE SurroundUsing Game Adjusting the bass woofer part outputAdjusting sound quality Adjusting the volume balance of front speakersFunctions and settings Setting distancesSetting 7.1-channel virtual surround Press er to select the distance and press OKViera Link Hdavi Control setting Switching between dual soundsClear audio at low volume Switching the attenuatorSwitching the input signal detection setting Reset factory settings„ Repeat steps 3 and 4 to change setting Input TV, DVD, AUX1, AUX2Error messages Using with headphonesSpecifications Display Check point/Cause/Countermeasure PagesTroubleshooting guide Digital signals that can be played on this system MaintenanceGlossary If you see this symbol Product informationUser memo Dolby LaboratoriesLimited Warranty only for U.S.A. and Puerto Rico Panasonic Home Audio Products Limited WarrantyLimited Warranty only for Canada Safety precautions FCC NoteCorporation of North America Panasonic Corporation
Related manuals
Manual 32 pages 62.63 Kb Manual 32 pages 10.56 Kb

SC-ZT2 specifications

The Panasonic SC-ZT2 is an innovative soundbar system that brings an immersive audio experience to any home entertainment setup. Designed to complement the modern living space, this sleek soundbar not only delivers high-quality sound but also integrates advanced technologies that enhance its performance.

One of the standout features of the SC-ZT2 is its unique 3D surround sound technology. This system utilizes Panasonic's proprietary Drivers and Advanced Digital Signal Processing (DSP) to create a spatial audio experience that fills the room. This technology allows users to enjoy movies, music, and games with a depth and clarity that traditional soundbars often struggle to achieve.

The SC-ZT2 boasts a powerful output, with its built-in subwoofers providing deep bass response that enhances the overall audio experience. This feature is particularly appealing for action movie enthusiasts and music lovers who crave that extra punch in their sound. The design of the soundbar is also noteworthy, blending seamlessly into contemporary interiors while providing robust build quality.

Connectivity is another area where the SC-ZT2 shines. It supports Bluetooth, allowing users to wirelessly stream music from their smartphones and tablets. Additionally, the soundbar is equipped with HDMI ARC (Audio Return Channel) which simplifies connections with compatible TVs, making setup quick and convenient. For those who prefer wired connections, the SC-ZT2 includes optical and auxiliary input options.

The SC-ZT2 features a user-friendly interface, with intuitive controls that make it easy for anyone to adjust settings or switch between input sources. With its built-in voice assistant compatibility, users can also control the soundbar using voice commands, adding to its convenience.

In terms of sound quality, the SC-ZT2 excels with rich midrange tones and clear highs, ensuring that dialogues remain crisp and intelligible, even in the loudest scenes. This soundbar also supports various audio formats, providing versatility for different content types.

Overall, the Panasonic SC-ZT2 represents a perfect blend of performance and design, making it an excellent choice for anyone looking to elevate their home audio experience. With its advanced technologies, powerful sound, and sleek aesthetics, it is a compelling addition to any home theater setup.
Top Page Image Contents