Panasonic SC-NA30 owner manual Troubleshooting

Page 15

Troubleshooting

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to “Customer Services Directory (United States and Puerto Rico)” (> 21) if you reside in the U.S.A. or Puerto Rico, or refer to “Limited Warranty (ONLY FOR CANADA)” (> 22) if you reside in Canada.

[NA30]

The retractable panel is not operating correctly.

•The Auto Power Off function is activated, the retractable panel will remain lowered when the unit is turned off. To leave the retractable panel raised when the unit is turned off, press [Í/I] twice.

Sound from the device is cut off.

•Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. Increase the distance between this system and these devices.

•Do not place the unit in a place where radio waves will be blocked, such as a metal cabinet.

•The device is out of the 10 m (33 ft.) communication range. Move the device nearer to this unit. (See “About Bluetooth®” > 4)

•Remove any obstacle between this unit and the device.

•Switch off any wireless LAN device.

•Select “Emphasis on connectivity” for stable communication. (See “Switching the communication quality” > 12)

•When a PC and the unit are connected with Bluetooth®, check the sound output destination setting of the PC. If the sound skips or is not output correctly in other ways, perform “To return to the factory preset state” (> 14), and register the unit to the Bluetooth® device again. (> 10, 11)

•Depending on the device connected to the unit, sound may be cut off or noise

may be produced. When this happens, lower the volume of the device.

•When both the AUX IN jack and DC IN terminal are in use, noise may occur depending on the connected device. In this case, disconnect the AC adaptor.

The volume does not increase.

•Check the volume of the unit or the Bluetooth® device.

•In LP mode, even when the volume knob is adjusted, the volume of the unit may not increase. In this case, turn off the LP mode. (> 13)

The device cannot be connected.

•Refer to the operating instructions of the device, and perform the pairing operation again. (See “Pairing with Bluetooth® device” > 10)

•Make sure that this unit is not connected to a different device.

•The registration information of the unit may have been deleted from the Bluetooth® device. Register the unit again.

•Delete the registration information of the unit through the Bluetooth® menu, etc. on the Bluetooth® device first, and try to register the device again. (> 14)

The device is connected but audio cannot be heard from this unit.

•For some built-in Bluetooth® devices, you have to set the audio output to “SC-NA30” or “SC-NA10” manually. Read the operating instructions of the device for details.

•When the AUX IN jack is in use, the jack takes priority over the Bluetooth® function or the NFC function.

This unit is not operating correctly.

VQT5C36

For example, this unit turns off all of

a sudden or all indicator blink.

 

 

• Using a paper clip or similar material,

 

 

15

press the [RESET]. (> 6, 7)

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SC-NA30SC-NA10 Wireless Speaker SystemThis AC adaptor operates on AC between 100 V 240 But PrecautionsUnit AC adaptorFCC Note Battery pack Lithium ion battery packFollowing Applies in the U.S.A. and Canada Following Applies only in the U.S.ALicenses About BluetoothMaintenance If you see this symbolTable of contents Side view Control reference guide SC-NA30OFF Rear viewAUX in jack DC in terminal DC OUT terminal How to use the cover and operation of the unitControl reference guide SC-NA10 CoverAbout the power of this unit About the DC OUT terminal USB PreparationTurn on the unit Listening to audio from a Bluetooth device Connecting via Bluetooth menuListening to audio from a paired device One-Touch Connection Connecting by NFC Enable the NFC function on the Bluetooth deviceFor NFC-compatible AndroidTM devices only Switching the communication quality Disconnecting BluetoothEmphasis on sound quality LP mode is enabled Using LP modeUsing the AUX input Auto Power OffEnding the call Press To return to the factory preset stateReceiving a call Press when this unit rings Receiving a call hands-freeTroubleshooting Speaker section SpecificationsOne-Touch Connection NFC feature is not working Amplifier sectionTerminals section Bluetooth sectionAccessories section Microphone sectionHow to disassemble the SC-NA30 To remove the battery when disposing of this unitHow to disassemble the SC-NA10 Only for U.S.A. and Puerto Rico Limited Warranty Limits And ExclusionsAs of July User memo SC-NA10Ambler Drive, Mississauga, Ontario L4W 2T3 Limitations and ExclusionsContact Information VQT5C36 Ambler Drive Mississauga, Ontario L4W 2T3 Two Riverfront Plaza, Newark Panasonic Corporation

SC-NA30 specifications

The Panasonic SC-NA30 is a portable wireless speaker that brings powerful sound and exceptional versatility to music lovers. Designed with a sleek and modern aesthetic, the SC-NA30 is built to complement any environment, whether at home, outdoors, or on the go.

One of the standout features of the SC-NA30 is its impressive sound quality. The speaker is equipped with a two-way speaker system, featuring a high-performance woofer and a tweeter, which work together to deliver clear highs and deep bass. This design ensures that music lovers can experience their favorite tracks as they were meant to be heard, with balanced audio across all frequencies.

Connectivity is another significant advantage of the SC-NA30. It supports Bluetooth technology, allowing users to stream music wirelessly from their smartphones, tablets, or other Bluetooth-enabled devices. With a user-friendly interface, pairing and switching between devices is seamless, making it easy to get the party started or enjoy a quiet evening of music.

Another notable characteristic of the Panasonic SC-NA30 is its built-in rechargeable battery. The speaker can provide up to 20 hours of playback time on a single charge, which makes it ideal for long outings or gatherings. Additionally, the compact design makes it easy to transport, fitting comfortably in a backpack or under an arm.

The device also incorporates advanced audio technologies such as the Mega Bass function, which enhances low frequencies for a more impactful listening experience. Whether it's rock, hip-hop, or electronic dance music, the SC-NA30 ensures that every genre sounds incredible.

Furthermore, the speaker features a rugged construction that makes it resistant to splashes and dust, so users can enjoy their music worry-free during outdoor activities. This durability extends its usability in various settings, from beach outings to backyard barbecues.

In summary, the Panasonic SC-NA30 is a versatile and powerful portable speaker that combines impressive sound quality with robust features and long battery life. With its Bluetooth connectivity, convenient portability, and durable design, it's a perfect companion for music lovers who want to enjoy high-quality audio anywhere, anytime.
Top Page Image Contents