Camera Adjustments

To perform camera adjustments, complete the following steps:

1.Make sure the camera and service connectors are connected to the board inside the back box. You may have to remove the camera module from the back box.

2.Connect a monitor to the service connector (refer to Service Connector on page 31). Turn on power to the monitor.

3.Turn on power to the camera. The camera will start the following configuration process:

•The green LED inside the back box flashes five times per second for approximately two minutes, or until the PC or server recognizes the mini dome.

•If the dome is not connected to a DHCP PC/server, the green LED will flash for about four minutes before the camera switches to an automated private IP addressing mode.

NOTE: If the IP110 is connected to a DHCP network, the server will automatically assign an IP address to the camera. If the IP110 is connected to static network, the IP address 192.168.0.20 on netmask 255.255.0.0 is automatically assigned to the camera. If the camera has an older software version installed (versions 01.00.0038 and older for IP110 and versions 01.00.0018 for IP3701H), the network will automatically cycle through the IP address range of 169.254.200.0 through 169.254.200.255, on netmask 255.255.0.0. The first available address located will be assigned to the IP110. If the network cannot find an open address in the default range, contact your network administrator.

4.To adjust the camera, you will need a miniature trimpot adjustment tool with a 0.05-inch (1.27 mm) blade. Suggested tools include a miniature flat-tip screwdriver, a Philmore trimpot tool (#63-6808), and the Philmore 10-piece tool set (#63-910).

5.Refer to the following sections for detailed information on camera adjustments:

•Varifocal Lens Zoom and Focus Adjustments on page 22

•DN/CH Series Adjustments on page 23

•DW/CW Series (Wide Dynamic Range) Adjustments on page 26

6.After you have adjusted the unit, reinstall the camera module into the back box, and then install the trim ring, bubble, and dome liner (refer to page 30).

C3432M-F (6/08)

C3432M-F specifications

The Pelco C3432M-F is an advanced network camera that combines high-performance imaging capabilities with robust features tailored for various security applications. Designed for versatility and reliability, this camera is ideal for users looking to enhance their surveillance systems.

One of the standout features of the C3432M-F is its high-definition video resolution. With the ability to deliver 1080p full HD video, it ensures that images are clear and detailed, enabling users to identify subjects and discern important details even in challenging light conditions. The camera incorporates advanced image processing technology to enhance video quality, while also reducing noise and improving overall clarity.

The C3432M-F employs cutting-edge low-light performance technology, allowing it to capture high-quality images even in dimly lit environments. This is particularly beneficial for nighttime surveillance or in locations where ambient lighting is limited. The camera’s infrared (IR) capabilities ensure effective monitoring in complete darkness, with an impressive range for clear visibility.

This model also includes motorized varifocal lens capabilities, providing users with flexibility to adjust the focal length and field of view. This feature allows for easy installation and adjustment, accommodating various surveillance needs without the need for additional lenses. The motorized zoom functionality simplifies operation and improves situational awareness.

Another significant characteristic of the Pelco C3432M-F is its integration with advanced network technologies. It supports Power over Ethernet (PoE), which simplifies installation by allowing power and data transmission through a single cable. This can drastically reduce the complexity and costs associated with installation, especially in large security setups.

The camera is also equipped with advanced analytics features. These allow for intelligent video monitoring, including motion detection and intrusion detection capabilities. Users can receive alerts and notifications in real-time, significantly enhancing the responsiveness of security measures.

Moreover, the C3432M-F is designed to withstand various environmental conditions, making it suitable for both indoor and outdoor installations. Its durable housing can withstand elements, ensuring reliable performance across diverse settings.

In summary, the Pelco C3432M-F is a feature-rich network camera that offers high-definition video, exceptional low-light performance, flexible installation options, and intelligent analytics. Its robust design and advanced technologies make it an excellent choice for comprehensive and reliable surveillance solutions.