Pelco C3432M-F manual Reset Button, Selected and during the reboot, Default settings

Page 33

Reset Button

Use the reset button located on the board inside the back box to access the following modes:

Mode

Function

Unit Status Indicator Light

 

 

 

Configuration

Starts reset LED

Flashes green.

 

selection sequence.

 

 

 

 

Reboot

Restarts the unit.

Flashes green and red simultaneously, when entering

 

 

this mode. The LED then flashes green when mode is

 

 

selected and during the reboot.

 

 

 

Reset

Resets unit to factory

Flashes red when entering this mode. Flashes red when

 

default settings and

mode is selected, and then flashes green when camera

 

then restarts unit.

restarts. Camera is offline during reset mode.

 

 

 

Cancel

Cancels any

No light.

 

configuration or reset

 

 

action.

 

 

 

 

To access one of these modes:

1.Press and hold the reset button. The unit starts cycling through the modes; hold the button for four seconds to access (cycle through) each mode. The unit status indicator flashes the color for the current mode (refer to the table above).

2.When the color of the desired mode appears, release the button.

NOTES:

•If there is no configuration activity for 15 minutes, the camera will automatically exit the reset mode.

•The LED is not lit during normal operation.

RESET

BUTTON

RED / GREEN LEDS

Figure 27. Location of Reset Button and LEDs

C3432M-F (6/08)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents IP110 Series Camclosure Contents List of Tables List of IllustrationsImportant Safety Instructions Radio and Television Interference Regulatory NoticesOpen Source Software Notice System Models DescriptionDhcp Network Example Basic System ConfigurationsPrivate Network Example Basic Surface Installation Cover and Back Box InstallationElectrical Box Installation 4S Electrical BOX InstallationPlaster Ring Installation Plaster Ring InstallationSide Conduit Installation Side Conduit InstallationWiring Tables CAT5 CablePoE Alarm and 24 VAC Wires Supervised Alarm Conditions Supervised AlarmsUnsupervised Alarm Conditions Unsupervised AlarmsAlarm Connections Camera Orientation Camera ModuleCamera Module Bracket Module InstallationTo perform camera adjustments, complete the following steps Camera AdjustmentsLocation of Zoom and Focus Adjustments Varifocal Lens Zoom and Focus AdjustmentsRefer to to adjust the IP110-DN or IP110-CH model DN/CH Series AdjustmentsSW4-1 Auto Gain Control SW4-2 Backlight CompensationSW4-4 Flickerless SW4-5 Auto White Balance/Manual White BalanceSW4-6 Reserved DAY/NIGHT Operation Refer to to adjust the IP110-DW or IP110-CW model DW/CW Series Wide Dynamic Range AdjustmentsSW1-1 Video Format SW1-2 N/A SW1-3 Interlaced Scanning/Progressive ScanningSW1-5 Fluorescent/General SW1-4 Auto White Balance/Manual White BalanceSW1-6 General/Maximum Wide Dynamic Range SW1-7 Digital Slow ShutterAuto Iris Level Adjustment Positioning the Camera Camera PositioningInstall Dome and Trim Ring Service Connector Service ConnectorAttaching the 2.5 mm Monaural Headphone Plug Selected and during the reboot Reset ButtonReset Default settingsTroubleshooting Camera not No camera power IR cut filter setting Check DIP switch settingsGreen LED during camera power up If IR cut filter is functioningConfiguration Network not Faulty cable connectionRouter with an n-Port switch Contact your network administratorSpecifications Imaging Device Inch imager Picture Elements Signal System Ntsc or PAL Scanning SystemX 540 X 582Product Warranty and Return Information ISO9001

C3432M-F specifications

The Pelco C3432M-F is an advanced network camera that combines high-performance imaging capabilities with robust features tailored for various security applications. Designed for versatility and reliability, this camera is ideal for users looking to enhance their surveillance systems.

One of the standout features of the C3432M-F is its high-definition video resolution. With the ability to deliver 1080p full HD video, it ensures that images are clear and detailed, enabling users to identify subjects and discern important details even in challenging light conditions. The camera incorporates advanced image processing technology to enhance video quality, while also reducing noise and improving overall clarity.

The C3432M-F employs cutting-edge low-light performance technology, allowing it to capture high-quality images even in dimly lit environments. This is particularly beneficial for nighttime surveillance or in locations where ambient lighting is limited. The camera’s infrared (IR) capabilities ensure effective monitoring in complete darkness, with an impressive range for clear visibility.

This model also includes motorized varifocal lens capabilities, providing users with flexibility to adjust the focal length and field of view. This feature allows for easy installation and adjustment, accommodating various surveillance needs without the need for additional lenses. The motorized zoom functionality simplifies operation and improves situational awareness.

Another significant characteristic of the Pelco C3432M-F is its integration with advanced network technologies. It supports Power over Ethernet (PoE), which simplifies installation by allowing power and data transmission through a single cable. This can drastically reduce the complexity and costs associated with installation, especially in large security setups.

The camera is also equipped with advanced analytics features. These allow for intelligent video monitoring, including motion detection and intrusion detection capabilities. Users can receive alerts and notifications in real-time, significantly enhancing the responsiveness of security measures.

Moreover, the C3432M-F is designed to withstand various environmental conditions, making it suitable for both indoor and outdoor installations. Its durable housing can withstand elements, ensuring reliable performance across diverse settings.

In summary, the Pelco C3432M-F is a feature-rich network camera that offers high-definition video, exceptional low-light performance, flexible installation options, and intelligent analytics. Its robust design and advanced technologies make it an excellent choice for comprehensive and reliable surveillance solutions.
Top Page Image Contents