Pelco C3432M-F SW4-4 Flickerless, SW4-5 Auto White Balance/Manual White Balance, SW4-6 Reserved

Page 24

SW4-4: Flickerless

In certain lighting conditions, a flicker in the light source may affect camera operation. Flickering can be caused by a number of conditions, including the quality of the source power and the age and type of fluorescent bulbs and ballasts.

Set SW4-4 to ON to enable flickerless operation. The camera will remove the effects of flickering when present. The shutter speed will be set to 1/120 (NTSC) or 1/100 (PAL).

Set it to OFF to disable flickerless operation. This is the default setting.

NOTE: If you enable flickerless operation, you should use AC line lock for best results.

SW4-5: Auto White Balance/Manual White Balance

Auto white balance (AWB) is enabled by default (OFF).

To manually set and lock the white balance:

1.Set SW4-5 to OFF.

2.Hold a white background in front of the lens until the video shows all white.

3.While holding the background in place, set SW4-5 to ON. A blue blinking block appears on the video image for a few seconds. When the block changes to solid green, the manual white balance (MWB) process is complete.

SW4-6: Reserved

Do not change SW4-6 from its factory setting. SW4-6 must be set to OFF for Varifocal models; it must be set to ON for fixed iris lenses.

BLEMISH DETECTION

If small white or color spots appear in the video image, one or more pixels on the camera imager may be defective. (This condition is common for both CCD and CMOS imagers.)

DN and CH Series cameras with auto iris lenses automatically detect and correct defective pixels during startup. Video turns on, then off, and then on again. If white or color spots still appear, you can correct the defective pixels manually.

CH Series cameras with fixed iris lenses do not automatically detect and correct defective pixels. You can correct the defective pixels manually.

To manually correct defective pixels:

1.Cover the lens completely. Make sure no light can enter the lens.

NOTE: The mechanical iris lens aperture does not completely block the light.

2.Press and hold button SW3 for one second. The camera will find and correct defective pixels. NOTE: Any defective pixels that cannot be completely corrected may still appear.

3.Release button SW3.

4.Uncover the lens for normal camera operation.

24

C3432M-F (6/08)

Image 24
Contents IP110 Series Camclosure Contents List of Illustrations List of TablesImportant Safety Instructions Regulatory Notices Radio and Television InterferenceOpen Source Software Notice Description System ModelsBasic System Configurations Dhcp Network ExamplePrivate Network Example Cover and Back Box Installation Basic Surface Installation4S Electrical BOX Installation Electrical Box InstallationPlaster Ring Installation Plaster Ring InstallationSide Conduit Installation Side Conduit InstallationWiring Tables CAT5 CablePoE Alarm and 24 VAC Wires Supervised Alarms Supervised Alarm ConditionsUnsupervised Alarms Unsupervised Alarm ConditionsAlarm Connections Camera Module Camera OrientationModule Installation Camera Module BracketCamera Adjustments To perform camera adjustments, complete the following stepsVarifocal Lens Zoom and Focus Adjustments Location of Zoom and Focus AdjustmentsDN/CH Series Adjustments Refer to to adjust the IP110-DN or IP110-CH modelSW4-1 Auto Gain Control SW4-2 Backlight CompensationSW4-4 Flickerless SW4-5 Auto White Balance/Manual White BalanceSW4-6 Reserved DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments Refer to to adjust the IP110-DW or IP110-CW modelSW1-1 Video Format SW1-2 N/A SW1-3 Interlaced Scanning/Progressive ScanningSW1-4 Auto White Balance/Manual White Balance SW1-5 Fluorescent/GeneralSW1-6 General/Maximum Wide Dynamic Range SW1-7 Digital Slow ShutterAuto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Dome and Trim Ring Service Connector Service ConnectorAttaching the 2.5 mm Monaural Headphone Plug Reset Button Selected and during the rebootReset Default settingsTroubleshooting IR cut filter setting Check DIP switch settings Camera not No camera powerGreen LED during camera power up If IR cut filter is functioningNetwork not Faulty cable connection ConfigurationRouter with an n-Port switch Contact your network administratorSpecifications Signal System Ntsc or PAL Scanning System Imaging Device Inch imager Picture ElementsX 540 X 582Product Warranty and Return Information ISO9001

C3432M-F specifications

The Pelco C3432M-F is an advanced network camera that combines high-performance imaging capabilities with robust features tailored for various security applications. Designed for versatility and reliability, this camera is ideal for users looking to enhance their surveillance systems.

One of the standout features of the C3432M-F is its high-definition video resolution. With the ability to deliver 1080p full HD video, it ensures that images are clear and detailed, enabling users to identify subjects and discern important details even in challenging light conditions. The camera incorporates advanced image processing technology to enhance video quality, while also reducing noise and improving overall clarity.

The C3432M-F employs cutting-edge low-light performance technology, allowing it to capture high-quality images even in dimly lit environments. This is particularly beneficial for nighttime surveillance or in locations where ambient lighting is limited. The camera’s infrared (IR) capabilities ensure effective monitoring in complete darkness, with an impressive range for clear visibility.

This model also includes motorized varifocal lens capabilities, providing users with flexibility to adjust the focal length and field of view. This feature allows for easy installation and adjustment, accommodating various surveillance needs without the need for additional lenses. The motorized zoom functionality simplifies operation and improves situational awareness.

Another significant characteristic of the Pelco C3432M-F is its integration with advanced network technologies. It supports Power over Ethernet (PoE), which simplifies installation by allowing power and data transmission through a single cable. This can drastically reduce the complexity and costs associated with installation, especially in large security setups.

The camera is also equipped with advanced analytics features. These allow for intelligent video monitoring, including motion detection and intrusion detection capabilities. Users can receive alerts and notifications in real-time, significantly enhancing the responsiveness of security measures.

Moreover, the C3432M-F is designed to withstand various environmental conditions, making it suitable for both indoor and outdoor installations. Its durable housing can withstand elements, ensuring reliable performance across diverse settings.

In summary, the Pelco C3432M-F is a feature-rich network camera that offers high-definition video, exceptional low-light performance, flexible installation options, and intelligent analytics. Its robust design and advanced technologies make it an excellent choice for comprehensive and reliable surveillance solutions.