Pelco C3662M installation manual DS Enterprise Distributed System Installation

Page 31

DS Enterprise Distributed System Installation

Install all physical equipment in a rack or other permanent location:

1.Install the XMUX2 units as described in XMUX2 Installation on page 28.

2.Install the DMS as described in DMS Installation on page 26.

3.Install the VAUs as described in VAU Installation on page 26.

Name the DMS:

1.Start the DMS.

2.On the DMS Desktop, right-click My Computer and select Properties.

3.Select the Network Identification tab.

4.Click Properties.

5.Type a computer name and click OK.

6.Click OK in the System Properties window.

7.Restart the DMS when prompted.

Configure the DMS TCP/IP address:

1.On the DMS Desktop, right-click My Network Places and select Properties.

2.Right-click Local Area Connection and select Properties.

3.Select Internet Protocol (TCP/IP) and click Properties.

4.Select “Use the Following IP Address” and enter a static IP address and subnet mask. Click OK.

5.Click OK in the Local Area Connection Properties window.

Point the VAUs to the Digital Sentry database on the DMS. Complete the following steps on each VAU:

1.Start the VAU.

2.From the VAU Start menu, open Settings>Control Panel>Administrative Tools>Data Sources (ODBC).

3.Select the System DSN tab.

4.Click Add.

5.Select SQL Server® and click Finish.

6.Type Digital Sentry in the Name field.

7.Type the name of the DMS for the Server.

8.Accept the default authentication and click Next.

9.Select Digital Sentry from the “Change the Default Database To” drop-down list. Click Next.

10.Accept the language and other settings and click Finish.

11.Click Test Data Source. If you do not see a message that indicates the test completed successfully, perform these steps again. Otherwise, click OK to close the ODBC configuration windows.

Verify that the VAUs and XMUX2 units are properly connected by completing the following steps on each VAU:

NOTE: Do not perform these steps until the XMUX2 units are properly installed and connected to the VAU, as described in XMUX2 Installation on page 28.

1.Run XPress WinView from Start>Programs>Integral. The application automatically detects all the XPress boards in the VAU and any connected XMUX2 units. Video from the first detected board is then displayed in the video windows.

2.Switch among all connected XMUX2 units using buttons 1-4 at the top of the main window.

30

C3662M (6/08)

Page 30 Page 32
Image 31
Page 30 Page 32
Contents P O R TA N T N O T E Integral Digital Sentry Page Contents C3662M 6/08 List of Illustrations List of Tables Important Safety Instructions Video Quality Caution Regulatory NoticesTypical Systems IntroductionTypical DS Enterprise Distributed System DS Enterprise Savr Installation Component InstallationRear Panel of DS Enterprise Savr DS Xpress with XMUX2 InstallationRear Panel of DS XPress with XMUX2 Output DS Xpress with Internal Camera Inputs InstallationRear Panel of DS XPress with Internal Camera Inputs Rear Panel of 9- and 16-Input DS Desktop DS Desktop InstallationRear Panel of 4-Input DS Desktop DS 1000 InstallationRear Panel of DS Rear Panel of DS RealVue XPress DS Realvue Xpress InstallationDS RealVue XPress Audio Connector DS Realvue Desktop InstallationDS RealVue Desktop Alarm Bracket Rear Panel of DS RealVue RAID DS Realvue RAID InstallationXIO Installation XIO Cable Rear Panel of DS NVR DS NVR InstallationVAU Installation DMS InstallationRear Panel of VAU Rear Panel of XMUX2-16 XMUX2 InstallationDS Enterprise SAVR/DS XPress/VAU PTZ Connections PTZ InstallationDS Enterprise Distributed System Installation C3662M 6/08 Digital Sentry CLIENT/ADMIN Software Software InstallationDigital Sentry SERVER/VAU Software Changing AN IP Address Changing PasswordsProcedural Instructions Changing a Computer NameStarting and Stopping Services Changing the Startup Mode of a ServiceChanging the Time Zone System and Display Requirements for Client Computers Configuring and Testing Odbc ConnectivityRules for Caching on Digital Sentry Client Computers Renaming a DS Server Renaming DS ComponentsRenaming a VAU Changing the SA Password Reconfiguring Dsadmin After AN IP Address ChangeConfiguring and Verifying Network Storage Connecting a Serial Input Device to a DS System Flashguardtest Flashguard and the Watchdog ServiceRAID IP Addresses Relay Output CharacteristicsSubnet mask Isolating Storage Units on a Private NetworkUsing Xpress Winview Using the Fltime UtilityUsing Realvue Diagnostic Tool Using Integral License KEY UtilityHard Drives Network Health MonitoringBacking UP the Database Using Digital Sentry Backup ManagerRestoring Archived Data Rebuilding Using -FIXLOCAL Repairing and Rebuilding a Digital Sentry DatabaseTesting a Network Connection Repairing a Restored DatabaseChecking for Video Files Digital Sentry Network Speed SimulationOption #2 Running a RecoveryAfter Recovery Option #1Removing References to Local Files on Failed Hard Drives Recovering Video Files Without a Database BackupVideo Specifications DS RealVue DesktopSpecifications DS RealVue RAID Specifications DS RealVue XPress IP CIF Specifications DSXMUX-2 Specifications DS XPressSpecifications DS Desktop Specifications DS Enterprise Specifications DS NVR Product Warranty and Return Information ISO9001
Related manuals
Manual 4 pages 12.31 Kb

C3662M specifications

The Pelco C3662M is a state-of-the-art camera designed for robust surveillance and exceptional performance in various environments. Built for security applications, this camera features advanced imaging technology that ensures reliable monitoring and high-quality video capture.

One of the main features of the C3662M is its high-resolution image sensor. This sensor captures clear and crisp images, even in low-light conditions. With a resolution of 2 megapixels, the camera delivers detailed footage that can be crucial for identification purposes. The camera is capable of generating high-definition video streams, providing security operators with the clarity they need to assess any situation effectively.

The C3662M also incorporates advanced technology such as Wide Dynamic Range (WDR), which allows it to perform exceptionally well in scenes with contrasting lighting. This feature ensures that both the bright and dark areas of a scene are captured with excellent detail, making the camera particularly useful in environments like parking lots or entryways where lighting conditions can vary greatly.

Another critical characteristic of the C3662M is its low-light performance. Equipped with infrared (IR) capabilities, the camera can operate effectively in complete darkness, making it an ideal choice for 24/7 surveillance. The IR illumination allows the camera to capture clear images even when there is no visible light.

The C3662M is also designed for versatility in its deployment. It supports various mounting options and configurations, enabling users to install the camera in various locations, from indoor environments to outdoor settings. The rugged construction of the camera ensures it can withstand adverse weather conditions, making it suitable for use in challenging environments.

In terms of connectivity, the C3662M is compatible with various video management system solutions. It can easily integrate into existing security infrastructures, allowing for seamless operation and monitoring.

With its combination of high-resolution imaging, advanced WDR technology, and versatile installation options, the Pelco C3662M stands out as a premium choice for security applications. This camera addresses the needs of modern surveillance with reliability, ensuring that users can maintain peace of mind through effective monitoring capabilities.
Top Page Image Contents