Pelco C10DN manual Masking, Title, Select this option to configure the camera title

Page 23

MASKING

Masking lets you block certain areas of a camera scene. A maximum of eight masks can be defined.

NOTE: If you add a ninth mask, the camera erases the first mask. You cannot configure more than eight masks.

 

 

MASKING

MASK

 

-> OFF

MASK COLOR

-> -2

MASK EDIT

-> 0

MASK ERASE

 

BACK

EXIT

 

MASK: Use this option to enable or disable masking; the default setting is OFF.

MASK COLOR: Use this option to select the color of the mask. Available settings are black, white, gray, red, green, blue, and yellow. The default setting is BLACK.

MASK EDIT: Use this option to edit one mask. To edit a mask, complete the following steps:

1.Change the MASK setting on the MASKING menu to ON.

2.Select the MASK EDIT menu. The MASK SETTING menu appears.

MASKTITLESETTING

STITLEELECT START POSITION -> OFF EDIT TITLE

BACK EXIT

NOW POINT = ( XXX, XXX )

3.Use the pointer to configure the mask area.

a.Press the button up, down, left, or right to move the cursor to the upper-left corner of the mask.

b.Press the center of the button to mark the upper-left corner.

c.Press the button up, down, left, or right to move the cursor to the lower-right corner of the mask. If you move the cursor either left or above the start point, the mask edit is cancelled.

d.Press the center of the button to mark the lower-right corner. The mask area is blacked out. The MASKING menu appears with the new mask.

4.Repeat step 3 for each additional mask.

Mask Erase

Select this option to erase one or more masks. The camera erases masks from the last created to the first created. To erase a mask, select MASK ERASE. The mask that was last created disappears. Repeat to erase additional masks.

TITLE

Select this option to configure the camera title.

TITLE: Use this option to enable or disable the title display; the default setting is OFF.

EDIT TITLE: Use this option to enter or edit the camera title, up to 16 characters. The default setting is blank.

To enter a camera title, complete the following steps:

1.Change the TITLE setting on the TITLE menu to ON.

2.Select the EDIT TITLE menu. The EDIT TITLE menu appears.

3.Press the button up, down, left, or right to move the cursor to the desired character. The space character is located below the letter “n.”

4.Press the center of the button to select the character. The selected character appears in the blank area at the bottom of the screen.

5.To clear a character, select BS (backspace). The camera deletes the last character entered.

6.Repeat steps 3 and 4 until you have entered the camera title.

7.When the title is correct, select BACK to return to the TITLE menu.

 

TITLE

TITLE

-> OFF

EDIT TITLE

 

BACK

EXIT

TITLE EDIT

ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz 123456789-/

BS

RETURN

C2944M-G (6/09)

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents C10DN Series Camera Contents List of Tables List of IllustrationsGraphic Symbol Explanation Important Safety Instructions Regulatory Notices Equipment Handling PrecautionsRequired Tools Optional AccessoriesDescription ModelsCamera Layout Mounting the Lens InstallationWiring AN Auto Iris Lens Lens MountingCable Type Maximum Distance Connecting VideoCamera Mounting Table A. Video Coaxial Cable RequirementsC10DN-7X Camera only Connecting PowerConnecting AC Power Connecting AC PowerConnecting DC Power Connecting DC PowerDo not exceed the values listed in Table C Connecting DAY/NIGHT Filter ControlSignal Voltage Move the button left or right Accessing the Setup MenusNavigating the Menu Move the button up or downFunction SET Setup MenusPixel Correction Main MenuActive Exposure SettingsFunction Settings ProfilesEclipser Exposure SettingsAuto Exposure DAY and Night DC Iris LevelFlickerless Automatic Gain ControlLine Sync Function SettingsDetect Time Filter LimitSharpness White BalanceChroma GammaTitle Select this option to configure the camera titleMasking System Information Save AS CustomPixel Correction Fixed focal length lens only Lens FocusingVarifocal lens only Camera Synchronization Manual White Balance Calibration Specifications Storage Humidity Operating TemperatureStorage Temperature Operating HumidityProduct Warranty and Return Information

C10DN specifications

The Pelco C10DN is an advanced surveillance camera designed for both indoor and outdoor applications. It is distinguished by its compact design, ease of installation, and high-performance capabilities. The C10DN is part of Pelco's renowned range of security cameras, tailored to provide essential features that cater to a wide array of monitoring needs.

One of the standout features of the Pelco C10DN is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crystal-clear images with exceptional detail. It operates effectively in varying lighting conditions, boasting a wide dynamic range that ensures visibility in bright highlights and deep shadows alike. The camera also supports high-quality digital video output, which enhances image processing and improves overall video clarity.

The C10DN utilizes advanced technologies to enhance its performance. Among these is the integration of Day/Night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light levels. This capability enables continuous surveillance and helps maintain image quality during low-light conditions, making it ideal for nighttime monitoring. Furthermore, it features built-in infrared illumination options that extend its effectiveness even in complete darkness.

In terms of durability and resilience, the Pelco C10DN is constructed with robust materials suitable for demanding environments. It complies with IP66 ratings for ingress protection, ensuring that the camera is resistant to dust and water, which is vital for outdoor installations. Additionally, its rugged design includes options for mounting on various surfaces, keeping installation versatile and convenient.

The camera is equipped with multiple lens options allowing users to choose the appropriate focal length to meet their specific surveillance needs. Additionally, it supports various control protocols, including Pelco-D, enabling seamless integration with existing surveillance systems.

In summary, the Pelco C10DN is engineered to meet the modern demands of security and surveillance. Its high-resolution imaging, advanced Day/Night technology, durable construction, and flexible installation options combine to make it an excellent choice for users seeking reliable and effective monitoring solutions across a range of settings.
Top Page Image Contents