Pelco C10DN manual Save AS Custom, Pixel Correction, System Information

Page 24

SAVE AS CUSTOM

Select this option to create and save a custom profile. Whenever you open and make changes to the EXPOSURE SET and FUNCTION SET menus, the camera stores the settings. These setting can be saved as a custom profile.

SAVE AS CUSTOM

CURRENT SETTING

ARE SAVED

OK CANCEL

To save defined exposure and function settings as a CUSTOM profile, complete the following steps:

1.Move the cursor to the SAVE AS CUSTOM menu.

2.Press the menu selection button, the SAVE AS CUSTOM menu is displayed.

3.Move the cursor to OK and then press the selection button again. The profile is saved and the screen automatically returns to the MAIN MENU.

PIXEL CORRECTION

If white spots appear in the video image, one or more pixels on the camera imager may be defective. This condition is common to CCD camera imagers.

PIXEL CORRECTION

COVER THE LENS

AND PRESS OK

Select this option to automatically detect and correct these defects. This feature helps you maintain image quality.

To perform this procedure, complete the following steps:

OK CANCEL

1.Use a lens cap to cover the lens. Make sure no light can enter the lens. The mechanical iris lens aperture does not completely block the light. Therefore, you should use a lens cap.

2.Select PIXEL CORRECTION. The PIXEL CORRECTION menu appears.

3.Select OK. The camera performs the procedure and the MAIN MENU appears.

NOTE: Any defective pixels that cannot be completely corrected may still appear.

SYSTEM INFORMATION

Select this option to display the camera firmware information.

Restore Factory Settings

Select this option to reset the camera to the factory default settings. This option clears all saved user- definable settings, except the following:

•CAMERA SETUP menu: ADDRESS, COM SPEED

•LINE SYNC menu: V-PHASE ADJ

•PIXEL CORRECTION

To restore the camera to the factory default settings, complete the following steps:

RESTORE FACTORY SETTING

ALL SETTING ARE

INITIALIZED

OK CANCEL

1.Select RESTORE FACTORY SETTINGS on the SYSTEM INFORMATION menu. The RESTORE FACTORY SETTINGS menu appears.

2.Select OK. The camera resets all parameters to the factory default settings (except those listed above), and then the MAIN MENU appears.

24

C2944M-G (6/09)

Page 23 Page 25
Image 24
Page 23 Page 25
Contents C10DN Series Camera Contents List of Illustrations List of TablesGraphic Symbol Explanation Important Safety Instructions Equipment Handling Precautions Regulatory NoticesOptional Accessories DescriptionModels Required ToolsCamera Layout Installation Wiring AN Auto Iris LensLens Mounting Mounting the LensConnecting Video Camera MountingTable A. Video Coaxial Cable Requirements Cable Type Maximum DistanceConnecting Power C10DN-7X Camera onlyConnecting AC Power Connecting AC PowerConnecting DC Power Connecting DC PowerConnecting DAY/NIGHT Filter Control Signal VoltageDo not exceed the values listed in Table C Accessing the Setup Menus Navigating the MenuMove the button up or down Move the button left or rightSetup Menus Function SETMain Menu Pixel CorrectionExposure Settings Function SettingsProfiles ActiveExposure Settings Auto ExposureEclipser DC Iris Level FlickerlessAutomatic Gain Control DAY and NightFunction Settings Detect TimeFilter Limit Line SyncWhite Balance ChromaGamma SharpnessSelect this option to configure the camera title MaskingTitle Save AS Custom Pixel CorrectionSystem Information Lens Focusing Fixed focal length lens onlyVarifocal lens only Camera Synchronization Manual White Balance Calibration Specifications Operating Temperature Storage TemperatureOperating Humidity Storage HumidityProduct Warranty and Return Information

C10DN specifications

The Pelco C10DN is an advanced surveillance camera designed for both indoor and outdoor applications. It is distinguished by its compact design, ease of installation, and high-performance capabilities. The C10DN is part of Pelco's renowned range of security cameras, tailored to provide essential features that cater to a wide array of monitoring needs.

One of the standout features of the Pelco C10DN is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crystal-clear images with exceptional detail. It operates effectively in varying lighting conditions, boasting a wide dynamic range that ensures visibility in bright highlights and deep shadows alike. The camera also supports high-quality digital video output, which enhances image processing and improves overall video clarity.

The C10DN utilizes advanced technologies to enhance its performance. Among these is the integration of Day/Night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light levels. This capability enables continuous surveillance and helps maintain image quality during low-light conditions, making it ideal for nighttime monitoring. Furthermore, it features built-in infrared illumination options that extend its effectiveness even in complete darkness.

In terms of durability and resilience, the Pelco C10DN is constructed with robust materials suitable for demanding environments. It complies with IP66 ratings for ingress protection, ensuring that the camera is resistant to dust and water, which is vital for outdoor installations. Additionally, its rugged design includes options for mounting on various surfaces, keeping installation versatile and convenient.

The camera is equipped with multiple lens options allowing users to choose the appropriate focal length to meet their specific surveillance needs. Additionally, it supports various control protocols, including Pelco-D, enabling seamless integration with existing surveillance systems.

In summary, the Pelco C10DN is engineered to meet the modern demands of security and surveillance. Its high-resolution imaging, advanced Day/Night technology, durable construction, and flexible installation options combine to make it an excellent choice for users seeking reliable and effective monitoring solutions across a range of settings.
Top Page Image Contents