Regulatory Notices, Equipment Handling Precautions

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

EQUIPMENT HANDLING PRECAUTIONS

To avoid damaging your camera, observe the following precautions:

1.The camera has threaded mounting locations on the top and bottom of the case. Use only a standard photographic mounting bolt with a 1/4-20 UNC thread.

2.Do not touch the surface of the optical filter. If the filter is dusty or is accidentally touched, use clean, compressed air or lens cleaning paper to clean it.

3.Do not expose the camera imager to direct sunlight as this may impair camera performance. Always keep the lens mount cap in place until you install the lens.

4.Do not use this camera outdoors without an appropriate enclosure. Do not install near flammable gas or corrosive chemical fumes.

5.Use clean, soft cloths to clean the camera case. If necessary, use a cloth moistened with a neutral detergent diluted with water; then dry with a dry cloth. Never use alcohol, benzene, or other volatile solutions.

6	C2944M-G (6/09)

C10DN specifications

The Pelco C10DN is an advanced surveillance camera designed for both indoor and outdoor applications. It is distinguished by its compact design, ease of installation, and high-performance capabilities. The C10DN is part of Pelco's renowned range of security cameras, tailored to provide essential features that cater to a wide array of monitoring needs.

One of the standout features of the Pelco C10DN is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crystal-clear images with exceptional detail. It operates effectively in varying lighting conditions, boasting a wide dynamic range that ensures visibility in bright highlights and deep shadows alike. The camera also supports high-quality digital video output, which enhances image processing and improves overall video clarity.

The C10DN utilizes advanced technologies to enhance its performance. Among these is the integration of Day/Night functionality, allowing the camera to automatically switch between color and monochrome modes based on ambient light levels. This capability enables continuous surveillance and helps maintain image quality during low-light conditions, making it ideal for nighttime monitoring. Furthermore, it features built-in infrared illumination options that extend its effectiveness even in complete darkness.

In terms of durability and resilience, the Pelco C10DN is constructed with robust materials suitable for demanding environments. It complies with IP66 ratings for ingress protection, ensuring that the camera is resistant to dust and water, which is vital for outdoor installations. Additionally, its rugged design includes options for mounting on various surfaces, keeping installation versatile and convenient.

The camera is equipped with multiple lens options allowing users to choose the appropriate focal length to meet their specific surveillance needs. Additionally, it supports various control protocols, including Pelco-D, enabling seamless integration with existing surveillance systems.

In summary, the Pelco C10DN is engineered to meet the modern demands of security and surveillance. Its high-resolution imaging, advanced Day/Night technology, durable construction, and flexible installation options combine to make it an excellent choice for users seeking reliable and effective monitoring solutions across a range of settings.