Servicing, Disassembly, Recharging and Reassembly

Servicing

DISASSEMBLY

CAUTION: Pressure must be released prior to opening the enclosure or personal injury may result.

1.Disconnect the power from the enclosure.

2.Remove the mating connector from the rear of the enclosure by turning the outer ring counterclockwise until a click is felt; then pull the mating portion of the connector off. You may elect to remove the enclosure from its mount, which will make the disassembly process much easier.

3.Remove the center cap from the Schraeder valve. Refer to Figure 1.

4.Relieve internal enclosure pressure by depressing and holding down the center stem of the Schraeder valve.

5.Remove the rear plate of the enclosure. Refer to Figure 1 and do the following:

a.Remove the spiral retaining ring from the back of the enclosure. Use a screwdriver to pry the end of the spiral retaining ring from the retaining ring groove.

b.Pull on the T-handle to remove the rear plate from the housing.

RECHARGING AND REASSEMBLY

Whenever the enclosure is disassembled for servicing, it should be recharged after reassembly and prior to installation. Recharging requires the use of a Pelco EH8000RKIT recharge kit (or equivalent) and O-ring kit, part number EH8006ORKIT.

To prepare the enclosure for recharging, follow the steps below.

1.Once the enclosure has been disassembled, remove the O-ring from the rear plate and install a new O-ring in the O-ring groove in the rear plate.

2.When the new O-ring has been installed in the rear plate, smear a liberal amount of the O-ring lubricant provided with the kit on the exterior surface of the O-ring and rear plate. Replace the desiccant bag in the enclosure with a new one provided with the kit.

3.Slide the camera sled back into the body making sure the front lip of the sled is under the retaining bracket of the enclosure. When fully installed, the rear plate will ﬁt ﬁrmly into the rear opening of the housing and the retaining groove will be fully visible.

4.Reinstall the spiral retaining ring in the retaining groove in the rear of the enclosure.

5.Recharge the enclosure. Refer to the section Recharging and Reassembly for instructions.

8	C1420M-H (1/07)

C1420M-H specifications

The Pelco C1420M-H is a state-of-the-art camera designed for robust surveillance needs, offering an ideal solution for both indoor and outdoor applications. With its advanced features and modern technologies, the C1420M-H is suited for various environments where security and monitoring are paramount.

One of the standout features of the C1420M-H is its high-definition video capabilities. The camera supports resolutions up to 1080p, ensuring that users can capture clear and detailed images, crucial for effective surveillance. The camera is equipped with a high-quality lens that provides a wide field of view, allowing for comprehensive monitoring of large areas without blind spots. This feature is particularly valuable in situations where extensive coverage is required.

In terms of technology, the Pelco C1420M-H integrates intelligent video analytics. This advanced feature enables the camera to autonomously detect and respond to specific events, such as motion in designated zones or the removal of objects. The analytics reduce the need for constant monitoring, allowing security personnel to focus on critical incidents instead of sifting through hours of footage.

The C1420M-H excels in low-light conditions, thanks to its advanced low-light technology. This capability ensures that the camera continues to deliver quality video even in challenging lighting situations, making it effective for nighttime surveillance. Additionally, the camera is designed to withstand harsh environmental conditions. With its rugged housing, it is weatherproof and capable of functioning in various climates, making it an excellent choice for outdoor installations.

Another significant characteristic of the C1420M-H is its ease of installation and integration. The camera can be seamlessly incorporated into existing security systems, supporting various protocols, which allows users to customize their surveillance solutions according to their specific needs. This flexibility is essential for businesses looking to enhance their security infrastructure without extensive overhauls.

Furthermore, the C1420M-H features remote access capabilities, enabling users to monitor live feeds and recorded footage from anywhere. This connectivity ensures that security teams can respond promptly and efficiently to incidents, maximizing the effectiveness of their surveillance efforts.

In conclusion, the Pelco C1420M-H is a versatile surveillance camera that combines high-definition video capabilities, intelligent analytics, low-light performance, and rugged durability. Its user-friendly installation, along with remote access features, positions it as an excellent choice for organizations looking to bolster their security measures with cutting-edge technology.