Pelco C1420M-H manual Mounting, Camera and Lens Installation

Page 4

Installation

MOUNTING

To attach the enclosure to the pan and tilt unit, perform the following installation steps.

1.Make sure the tilt shaft on the pan and tilt unit is near horizontal so that the connector in the tilt shaft is pointing upward.

2.Lift the housing over the pan and tilt unit, and align the connector in the bottom of the enclosure to the mating connector in the top of the pan and tilt unit.

3.Place the enclosure down onto the pan and tilt unit. Move the enclosure side-to-side and back and forth as required to mate the two connectors. Once the two units are mated, apply firm pressure downward and to the back of the enclosure to fully seat the enclosure to the pan and tilt unit.

4.Balance the enclosure on the pan and tilt. Tighten the two screws in the back of the RediLINK clamp with a 3/32-inch Allen wrench.

CAMERA AND LENS INSTALLATION

To install the camera and lens, perform the following steps:

1.Remove the rear plate of the enclosure. Refer to Figure 1 and do the following:

a.Remove the spiral retaining ring from the back of the enclosure. Use a screwdriver to pry the end of the spiral retaining ring from the retaining ring groove.

b.Pull on the T-handle to remove the rear plate from the housing.

2.Slide the sled out of the enclosure.

3.Remove the desiccant bag from the camera sled. Do not discard the bag.

4.Mount the camera and lens onto the sled:

a.Extend the lens to the maximum length before positioning the camera and lens.

b.Position the camera and lens so that they do not extend beyond the track.

c.Fasten the camera and lens to the sled. Fastener is not supplied.

5.Connect wiring for camera power, lens functions, and video. Refer to Figure 2.

6.Unwrap and install the desiccant bag inside the enclosure.

7.Reinstall the camera sled by sliding it back into the enclosure body. Secure with the spiral retaining ring.

8.Pressurize the inside of the enclosure and assemble the mating connector. Refer to the sections Recharging the Enclosure and Mating Connector Assembly.

4

C1420M-H (1/07)

Image 4
Contents EH8106L Legacy Contents List of IllustrationsImportant Safety Instructions DescriptionCamera and Lens Installation InstallationMounting EH8106L Enclosure Rear View Mating Connector Assembly Connector Shell Compression NUT Strain ReliefMaintenance Power ConnectionOperation Recharging the EnclosureRecharging and Reassembly DisassemblyServicing Specifications ElectricalEnvironmental Product Warranty and Return Information ISO9001

C1420M-H specifications

The Pelco C1420M-H is a state-of-the-art camera designed for robust surveillance needs, offering an ideal solution for both indoor and outdoor applications. With its advanced features and modern technologies, the C1420M-H is suited for various environments where security and monitoring are paramount.

One of the standout features of the C1420M-H is its high-definition video capabilities. The camera supports resolutions up to 1080p, ensuring that users can capture clear and detailed images, crucial for effective surveillance. The camera is equipped with a high-quality lens that provides a wide field of view, allowing for comprehensive monitoring of large areas without blind spots. This feature is particularly valuable in situations where extensive coverage is required.

In terms of technology, the Pelco C1420M-H integrates intelligent video analytics. This advanced feature enables the camera to autonomously detect and respond to specific events, such as motion in designated zones or the removal of objects. The analytics reduce the need for constant monitoring, allowing security personnel to focus on critical incidents instead of sifting through hours of footage.

The C1420M-H excels in low-light conditions, thanks to its advanced low-light technology. This capability ensures that the camera continues to deliver quality video even in challenging lighting situations, making it effective for nighttime surveillance. Additionally, the camera is designed to withstand harsh environmental conditions. With its rugged housing, it is weatherproof and capable of functioning in various climates, making it an excellent choice for outdoor installations.

Another significant characteristic of the C1420M-H is its ease of installation and integration. The camera can be seamlessly incorporated into existing security systems, supporting various protocols, which allows users to customize their surveillance solutions according to their specific needs. This flexibility is essential for businesses looking to enhance their security infrastructure without extensive overhauls.

Furthermore, the C1420M-H features remote access capabilities, enabling users to monitor live feeds and recorded footage from anywhere. This connectivity ensures that security teams can respond promptly and efficiently to incidents, maximizing the effectiveness of their surveillance efforts.

In conclusion, the Pelco C1420M-H is a versatile surveillance camera that combines high-definition video capabilities, intelligent analytics, low-light performance, and rugged durability. Its user-friendly installation, along with remote access features, positions it as an excellent choice for organizations looking to bolster their security measures with cutting-edge technology.