Philips 26PF5320/10 Installing your television set, Quick installation, Connecting the aerials

Installing your television set

&Positioning the television set

Place your TV on a solid stable surface. To avoid danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear.

é Connecting the aerials

• Use the aerial connection lead supplied and connect the : socket situated at the bottom of the TV to your aerial socket.

• Connect the power lead to the television and the mains plug into the wall socket (220-240 V/50 Hz). For connecting other appliances see page p.12.

“ Switching on

To switch on the set, press the POWER key. A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode(red indicator), press the P -/+key on the remote control.

The indicator will flash when you use the remote control.

Quick installation

When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country and language for the menus:

Plug’n’Play

CountryLanguage

GB English

If the menu is not displayed, press the MENU key to display the menu.

&Use the <> keys on the remote control to

select your country and validate with ≥.

If your country does not appear in the list, select choice “. . .”

éNext select your language using the <> keys and validate with ≥.

“The search starts automatically.All the available TV programmes and radio stations will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears.

To exit or interrupt the search, press MENU. If no programme is found, consult the possible solutions p. 14.

‘If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.

(If this is not the case, you need to use the Sort menu to number the programs correctly.

Some transmitters or cable networks broadcast their

own sort parameters (region, language, etc.). In this case, indicate your choice using the <> keys and validate with ≥.

5