HP 0706124 REV B manual Unpacking and Assembly

16.Locate and connect the profiler docking station cable from the right-hand ink tray to the port on the printer.

17. Using ten of the screws provided, attach the ink trays ➌ and

➍.

The right and left trays are mirror images of each other. Posi- tion the trays so that the inks load from the front.

Insert and tighten the screws most of the way, insert and drop the trays into place onto the screws, then tighten the screws the rest of the way.

➍

➌

Fig. 1-7. Attach the ink trays, connect docking station cable

18.Remove the shipping bands from the long black chain con- nected to the printhead carriage.

19.Remove the foam block that immobilizes the carriage for shipping.

20.Place the white point reference chip into the circular cutout on the platen, near the left end.

To reach the white point cutout, you will need to reach inside the left endcap.

1-12 Unpacking and Assembly