Calibration Summary These options allow you to print a summary of the AutoSet cali- bration, or transmit calibration data to a log file on the print server.

AutoSet Summary — when enabled, a table of the results of the AutoSet calibration is printed after the AutoSet test patterns:

Log Head Registration Data — sends head registration data to a log file on the print server.

Log Jet Data — sends jet data to a log file on the print server.

The AutoSet Summary contains the following data:

Ink Sample

Sample color block, for identification only

 

(not a print quality test).

 

 

Head

Printhead position for the printhead.

 

 

Profiler/Pen Present

The ink color of the profiler, which is inte-

 

gral to the ink reservoir.

 

 

Cartridge OK

Printhead passed all calibrations (Y), or

 

failed one or more calibrations (N).

 

 

Total Bad Jets

The number of missing and deflected jets

 

on the printhead. Use this number and

 

the Jets Disqualified, Jets Out, and Jets

 

Unfixed numbers to evaluate cartridge

 

performance.

 

 

Sabre Angle

Troubleshooting data for MacDermid

 

ColorSpan Technical Support.

 

 

Head-to-Head Registration

“OK” indicates that the printhead was

 

successfully registered. Any other code

 

indicates an error.

 

 

Bidirectional Registration

“OK” indicates that the printhead was

 

successfully registered. Any other code

 

indicates an error.

 

 

AutoJet Registration

“OK” indicates that the printhead was

 

successfully registered. Any other code

 

indicates an error.

 

 

Jets Disqualified by AutoJet

Indicates the total number of jets dis-

Jets Out for X Offset

qualified.

 

Jets Out for Y Offset

 

 

 

Calibration Summary

4-21