Power-Up SequenceWhat’s Next?

Turn on the power switch to observe the typical power-up sequence:

1.The control panel backlight illuminates. Move the contrast lever (located to the right of the control panel screen) up and down until the control panel graphics and messages are easily visible.

2.The printer runs a series of self-tests, and reports any errors it finds.

3.The camera searches for the location of the installed media’s home and far edges. If media is installed, this data tells the printer the width of the installed media. If no media is installed, the printer will prompt the user to load media when the next print job is sent to the printer.

4.The control panel displays the status screen.

Fig. 1-9. Initial status screen after first power-up

◆To familiarize yourself with the printer, refer to the remain- der of this chapter.

◆To proceed with installation, see Chapter 3, Installing Ink and Media.

◆For a complete description of using the control panel, see Chapter 2, Using the Control Panel.

Unpacking and Assembly

1-15