Unpacking and Assembly

This procedure assumes that the printer is in its final location. See the Site Preparation Guide for moving and unpacking hints.

WARNING The printer is too heavy to be lifted safely by one person. At least two persons are required to lift the printer.

WARNUNG Der Drucker ist zu schwer für eine Person. Mindes- tens 2 Personen sind erforderlich um den Drucker anzuheben.

Note

If you will be installing a ColorSpan Print Server, set

 

it up now and power it on. This will allow the server

 

to perform its automatic one-time new system check

 

while you unpack and assemble the printer.

 

 

Unpacking 1. The printer is delivered to your site packed in one cardboard box, attached to a plywood platform on two wooden pallets. Examine the shipping packaging for shipping damage.

Report any damage or apparent rough handling immediately to the shipper.

2.Remove the Unpacking and Assembly diagram, Watch Me First CD-ROM, and other documents from the outside of the box, and set them aside for reference.

You can use the Unpacking and Assembly diagram for refer- ence during the unpacking and assembly process. The Watch Me First CD-ROM contains useful “getting started” information, including a demonstration of unpacking, assembly, and setup.

3.Remove the bands that secure the box to the pallet and open the top flaps of the box.

4.Carefully cut the corners of the outer box and remove it from the pallet.

5.Remove the packing material from the printer.

6.Remove the stand crossbar, which is packed on top of the printer.

7.Remove the ink tray boxes, stand leg boxes, and accessory boxes, which are packed together in the center of the pallet.

8.Remove the cardboard shipping end caps from each end of the printer.

Unpacking and Assembly

1-5