HP 0706124 REV B manual Front

◆Print Mode — interactively assists you in installing print- heads in the correct positions, and setting the number of print passes. See “Selecting a Print Mode” on page 3-7 for instructions.

◆Carriage — moves the carriage out of the service station so you can load or clean the printheads and ink tubes, clean the image sensors, and remove the service station.

◆Prime — moves the printhead carriage to the priming posi- tion, so that one or more printheads can be manually primed (see “Manual Priming” on page 5-8 for instructions).

◆Media Unload — when unloading media, prints the calcu- lated amount of media remaining on the roll for reference (on the lower right edge). If using the takeup, cut the media from the takeup spool before pressing the Media Unload key (see “Cutting and Unloading Media” on page 3-32). When removing the partial roll from storage and re-loading on the printer, the user can report this value to the printer during the Media Load operation.

◆Media Load — causes the printer to measure width of the media installed in the printer, checks for proper media posi- tioning on the platen (for good vacuum contact), asks the user to enter the amount remaining on the supply roll, asks the user to select a takeup option. See “Loading Media” on page 3-24 for instructions.

◆ATTN (Attention) — blinks on the control panel when the printer detects an error condition, potential error condition, or when you make a change that requires recalibration or other action to ensure best print quality. See “User Assis- tance” on page 2-3 for further details.

2-8 Front Page