9.Gently tip the assembled stand on its back, and set it down on top of the shipping supports as shown in Fig.
Fig.
10.Using the two silver Phillips head screws provided, attach the stand to printer module.
The silver screws are required to establish an electrical ground connection between the printer and stand.
11.Press the caster locks down to prevent the printer from rolling.
12.With the aid of one or more persons, carefully rotate the assembled printer upright.
Be ready for the printer’s center of gravity to shift, so you can tip the printer to its upright position in a controlled manner.
13.Unlock the casters and roll the printer to its final location. Then lock down the casters.
14.Locate the printer on a flat, level floor, with all four wheels of the stand resting stationary on the floor. The printer must remain stationary and level for proper ink flow and best print quality.
15.Locate and connect the profiler docking station cable on the left end of the printer, and connect it from the
Unpacking and Assembly |