Final Assembly 1. Remove the two red-headed bolts from the right-hand ship- ping support.

Fig. 1-2. Remove the red-headed bolts

2.Locate the assembly supports .

The assembly supports are mirror images of each other; the foam pad should be positioned toward the ends of the printer.

3.Align the assembly supports with the shipping supports

, at the rear of the pallet as shown.

Fig. 1-3. Assembly supports , shipping supports

1-8

Unpacking and Assembly

Page 20
Image 20
HP 0706124 REV B manual Remove the red-headed bolts Locate the assembly supports ➍