◆Clear all bad jets — clears (marks as good) all jets cur- rently marked as unusable.
Select an option and follow the corresponding procedure below.
Report Individual Bad JetsWhen you select Report Individual Bad Jets, the control panel displays the following prompt:
Head 1:
Press Proceed to report a bad jet.
8.Press and to select a head number, then press (Proceed).
The control panel displays a numeric keyboard that you can use to enter the number of the bad jet.
Fig.
9.Enter the jet number, then press the Enter key.
10.When you are finished entering jet numbers, press the Esc key.
The control panel displays the head selection message again.
11.Press and to select the next head number, then press (Proceed).
12.Repeat steps 9 through 11 for each head containing bad jets you want to report.
Manual Calibrations |