6.Press the and keys to select the color map you will use.
The color map diagram changes with your selection.
7.Press to continue.
The control panel displays the Select Passes menu.
8.Press the and keys to select the number of print passes you want to use.
A higher number of passes produces the best print quality, but a lower number of passes will increase print speed. The default is 8 passes.
9.Press to continue.
The Front Page screen appears. The print mode is now selected. If you changed the number of passes by more than one pass, you should run a Media Feed Calibration (see “Media Feed Calibration” on page
10.Install the Color Map card that corresponds to the mode you selected into the plastic sleeve on the printer’s top cover.
Refer to the Color Map card to help you load inks into the correct locations. See the figure on page
Selecting a Print Mode |