HP 0706124 REV B B-5, Cause, Recovery, Diagnostics, Code, Message

	Table B-1. Actions and Warnings
Code, Message	Cause	Recovery
(CA) Carriage
A-CA-1 - Carriage Rotation Sensor	Carriage is not locked into printing	Rotate the carriage down into locked
	position.	position.
(IS) Ink Sensing
A-IS-1through A-IS-12 -	Ink reservoir n is out of ink.	Replace ink reservoir.
Module Out of Ink, Slot # n
A-IS-13through A-IS-24 -	Color/type in printhead and module	Ensure that color & type match in
Printhead/Module Mismatch, Slot #n	n do not match.	printhead & module.
A-IS-25 through A-IS-36 -	Either module or printhead n is not	Ensure that module and printhead
Missing Module/Printhead, Slot #n	detected.	are installed.
A-IS-37 - No Print Mode Selected	Print mode incomplete or not speci-	Press Print Mode key on control
	fied.	panel (page 3-7).
W-IS-1 through W-IS-12 -	Ink reservoir n has about 50 ml of ink	Replace the ink reservoir soon.
Low Ink, Slot #n	remaining.
(MC) Maintenance Clock
W-MC-1 - Preventive Maint. Clock	Encoder strip and service station	Clean encoder strip and service
Alarm	need cleaning.	station.
(MD) Media Drive
A-MD-1 - Media Advance Stalled	The media drive motor has stalled.	Check supply spool for binding,
		motor for failure.
W-MD-1 - Index Sensor Not Detect-	Media drive cannot detect index	Clean or replace media drive sensor.
ing Index	pulse.
W-MD-2 - Media Advance Turn-	Media is taking too long to advance.	Check supply spool for binding.
around Time Exceed
W-MD-3 - Media Advance Data	Media advance needs calibration.	Run Media Advance Calibration (ser-
Warning		vice menu).

Diagnostics B-5