4.Thread one of the red-headed bolts that you removed from the shipping support • through the assembly support into the pallet.

The pallet contains a threaded nut that will accept the bolt. Tighten the bolt hand-tight.

5.Attach the other assembly support to the pallet with the other red-headed bolt.

WARNING The printer is too heavy to be lifted safely by one person. At least two persons are required to lift the printer.

WARNUNG Der Drucker ist zu schwer für eine Person. Mindes- tens 2 Personen sind erforderlich um den Drucker anzuheben.

6.With two to four persons, roll the printer onto its back, on the assembly supports.

The printer is now resting entirely on the assembly sup- ports. The right-hand shipping support is trapped with the printer and will roll with it.

Fig. 1-4. Roll the printer onto its back

Unpacking and Assembly

1-9