Bacharach Infrared Printer manual Power Switch, Indicator LEDs, Pushbuttons, Sensors

Description IrDA Printer

Power Switch

The Power switch, located on the left side of the printer, is used to turn the unit ON and OFF.

Indicator LEDs

•Power LED (Green): Glows steady when the printer is turned ON.

•Error LED (Red): Flashes when:

-Out of paper

-Paper cover is open

-Set-up mode is selected (refer to Section Set-Up Mode).

-Buffer is full

-Print head temperature exceeds 140°F (60°C)

Pushbuttons

•FEED:

-Momentarily press this button to advance the paper. Press and hold down to feed paper continuously.

-This button in conjunction with the ON/OFF switch is used to start the printer’s self test function (refer to Section Self Test).

-When the printer is in its set-up mode, this button is used to modify the selected printer parameter (refer to Section Set-Up Mode).

•SEL:

-Used in conjunction with the ON/OFF switch to place the printer into its set-up mode (refer to Section Set-Up Mode).

-With the printer in its set-up mode, use this button to select the de- sired printer parameter.

Sensors

•Paper Out: When the paper roll runs out, or when the paper cover is opened, the printer is disabled to prevent damage to the print head. This condition is indicated by the Error LED flashing red.

•Infrared Sensor: Located at the front of the printer, this sensor receives the infrared output of an external instrument.

2 Instruction 24-9450