Bacharach Infrared Printer manual Set-Up Mode, SEL Button Feed Button

Operation IrDA Printer

Set-Up Mode

The printer has been set up at the factory with the following default parameters:

Baud rate	: 9600 bps
Handshaking	: DTR
Country	: U.S.A.
Print mode	: Text (upright)
Paper	: Normal paper
Density	: 100%
IrDA	: IrDA-SIR

If necessary, the default parameters can be changed as follows:

1.With the printer initially switched OFF, press and hold down the SEL pushbutton, and then switch ON the printer.

2.The printer now goes into its set-up mode as indicated by the red LED flashing. At this time all of the printer’s current parameter settings are printed, followed by the first parameter that can be modified.

Note: If no button is pressed within 15 seconds, the set-up mode is automatically terminated without changing the original parameters.

3.Baud rate is the first parameter printed. Pressing the FEED button causes the value of that parameter to change in the sequence shown in the following table.

SEL Button	FEED Button
Baud rate	115200, 57600, 38400, 19200, 9600, 4800, 2400,
Handshaking	1200, 600, 300
	DTR, X-on/X-off
Country	U.S.A., Turkish, Denmark2, Norway, Japan, Spain,
Print mode	Italy, Sweden, Denmark1, U.K., Germany, France
	Text(upright), Data(inverted)
Paper	Normal paper, Reprint paper
Density	50 – 150% in 5% steps
IrDA	HP-Ir, IrDA-Sir

6 Instruction 24-9450