Panasonic SC-PTX5 manual Speaker control, SyncTM, Enter Play Return

Speaker control

You can select whether audio is output from the home theater system or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television.

Home theater

Theater speakers are active.

≥When the home theater system is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn the home theater system on and select “AUX”§ or “D-IN”§as the source.

≥The television speakers are automatically muted.

≥You can control the volume setting using the volume or mute button on the TV’s remote control. (The volume level is displayed on the main unit’s FL display.)

≥To cancel muting, you can also use the home theater remote control (➜ page 10).

≥If you turn off the home theater system, television speakers will be automatically activated.

TV

Television speakers are active.

≥The volume of the home theater system is set to “0”.

–This function works only when “DVD/CD”, “AUX”§ or “D-IN”§is selected as the source on the home theater system.

≥Audio output is 2-channel audio.

≥When switching between the theater and television speakers, the TV screen may be blank for several seconds.

§To toggle which input source the main unit will automatically switch to, press [SETUP] while the main unit is in “AUX” or “D-IN” mode.

– The default setting is “AUX”.

EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”)

You can control the disc menus of the home theater system with the TV’s remote control when using the “DVD/CD” source. When operating the TV’s remote control, refer to the below illustration for operation buttons.

1Select the theater operation menu by using the television menu settings.

(For details, refer to the operating instructions of your television.)

ENTER/

PLAY

RETURN

≥The home theater system will automatically switch to “DVD/CD” if it is in “AUX”§ or “D-IN”§mode.

						”
§ To toggle the mode that this function works with, press [SETUP]						ControlTM
2 Select the desired item.
while the main unit is in “AUX” or “D-IN” mode.
–The default setting is “AUX”.
						“HDAVI
			EZ Sync
		TOP MENU
		MENU
		Control Panel				SyncTM
≥“TOP MENU”:	Shows a disc top menu
	(➜ page 15, 18) or program list (➜ page 19).
≥“MENU”:	Shows a disc menu (➜ page 15, 18) or play list
	(➜ page 19).					EZ
≥“Control Panel”: The basic operations for discs are available.
						the
				PAUSE
					PLAY	Using
				STOP
		SKIP			SKIP
					RETURN

[Note]

≥Depending on the menu, some button operations cannot be performed from the TV’s remote control.

≥“Control Panel” can be selected directly by using a button on the TV’s remote control (e.g. [SUB MENU]).

≥You cannot input numbers with the numbered buttons on the TV’s remote control ([0] to [9]). Use the home theater’s remote control to select the playlist etc.

RQTX0014

27