Step 7 – Input Camera Info
You may now setup the camera to one of the zones that you have already setup. In this example, we are setting up the camera into the “Master Bedroom” zone. You must setup at least one zone in order to have a camera for that zone.
Enter the IP address of your Internet Hub as shown below, with the port number. This is the same info you entered in Step 5. Also enter the user name and pass- word for the camera that you created in Step 5.
If you have multiple cameras, their port numbers should be all different. Please refer to Step 3 to assign the port number for multiple cameras.
Press “ADD” after entering all the information.
12