SkyLink wc-400 user manual View IP Camera and Change Settings

Page 9
Step 5 – View IP Camera and Change Settings

Step 5 – View IP Camera and Change Settings

You have completed setting up the camera, and you may view the IP Camera with your web browser.

Open the web browser and enter the IP address of your Internet Hub, that is the IP address on the back of the Internet Hub, in the format of xxxxx.my.skyhm.net, along with the port number in this specific format:

http://xxxxx.my.skyhm.net:81 (assume Port number is 81)

You will be asked to enter the user name and password of the camera. Enter the factory default user name: admin and leave the password field blank.

You now see the main page of the camera.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WC-400 SETTING UP THE IP CAMERA cONTENTWARRANTY CUSTOMER SERVICEINTRODUCTION SETTING UP IP CameraStep 1 - Power Up Step 2 - Search IP Camera Step 3 - Confirm Camera IP Setting Step 4 - Setup Wifi Network Page Step 5 - View IP Camera and Change Settings Page Page Step 6 - Setup Camera in Internet Hub Step 7 - Input Camera Info Step 8 - View Camera in Internet Hub You can also view the camera image on the zone page. Go into the zone you set- up for the camera, and you will see the camera image and all other programmed devices in that zone Page WARRANTY CUSTOMER SERVICECUSTOMER SERVICE Page MAY W i r e l e s s C o n t r o l E v e r y wh e r e
Top Page Image Contents