SkyLink wc-400 user manual Power Up

Page 4
Step 1 – Power Up

Step 1 – Power Up

Plug in the power adapter to the IP Camera and the LAN cable from the IP cam- era to one of the open ports of your Wifi router. Then click “Next”. The green LED on the IP Camera lens should flash. If the LED is off, check the LAN cable and power connection.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents WC-400 cONTENT SETTING UP THE IP CAMERAWARRANTY CUSTOMER SERVICESETTING UP IP Camera INTRODUCTIONStep 1 - Power Up Step 2 - Search IP Camera Step 3 - Confirm Camera IP Setting Step 4 - Setup Wifi Network Page Step 5 - View IP Camera and Change Settings Page Page Step 6 - Setup Camera in Internet Hub Step 7 - Input Camera Info Step 8 - View Camera in Internet Hub You can also view the camera image on the zone page. Go into the zone you set- up for the camera, and you will see the camera image and all other programmed devices in that zone Page CUSTOMER SERVICE WARRANTYCUSTOMER SERVICE Page MAY W i r e l e s s C o n t r o l E v e r y wh e r e
Top Page Image Contents