SkyLink wc-400 user manual Confirm Camera IP Setting

Page 6
Step 3 – Confirm Camera IP Setting

Step 3 – Confirm Camera IP Setting

This step shows you the IP setting of the camera. You do not need to change any settings here if you only have one IP Camera. You can simply click “Next”. You will need to enter the user name and password of the camera. The default user name is “admin”, leave the password field blank.

Please ensure you remember the port number, cause it is needed when you setup the camera in the Internet Hub. If you have more than one IP Camera, please change the Port number. Default is 81. For the 2nd camera, you may use Port 82, for the 3rd, you may use 83 etc.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WC-400 WARRANTY cONTENTSETTING UP THE IP CAMERA CUSTOMER SERVICESETTING UP IP Camera INTRODUCTIONStep 1 - Power Up Step 2 - Search IP Camera Step 3 - Confirm Camera IP Setting Step 4 - Setup Wifi Network Page Step 5 - View IP Camera and Change Settings Page Page Step 6 - Setup Camera in Internet Hub Step 7 - Input Camera Info Step 8 - View Camera in Internet Hub You can also view the camera image on the zone page. Go into the zone you set- up for the camera, and you will see the camera image and all other programmed devices in that zone Page WARRANTY CUSTOMER SERVICECUSTOMER SERVICE Page MAY W i r e l e s s C o n t r o l E v e r y wh e r e
Top Page Image Contents