Panasonic CQ-R223W manual Cassette Tape Player

E N G L I

Cassette Tape Player

E N G L I

S H

5

Loading a Cassette

Insert the cassette with the exposed tape side facing to the right. Gently push the cassette in until the loading begins. The cassette will be loaded in place and playback

Ejecting the Tape

Press [u] and the cassette will eject for removal, and the previous mode of operation will be resumed.

Notes:

S H

6

starts.

Program Indicator

(This indication “ ” rotates.)

•If power is switched off before [u] is pressed, the cassette will not eject. Switch on again and press [u] to eject the cassette.

•The cassette tape should always be removed from the cassette slot when not in use.

BAND APM

PWR

								DOLBY B NR	REMOTE
CQ-R223W
VO									M
L/
U									O
P									D
S
S									E
H
E
L
									TUNE
									TRACK
D		DISC	SCAN	REPEAT	RANDOM				P
U									IS
LO	MUTE	1 MTL NR 2	3 TPS	REP 4	5 B•S	6	MONO		D

23W

DOLBY B NR

Metal Tape

Blank Skip

Play Side Change

Press [1] (MTL) when playing metal or chromium dioxide (CrO2) tapes.

Press [5] (B•S) to skip unrecorded portions longer than 15 seconds on the tape.

	DISC	SCAN	REPEAT	RANDOM
TE	1 MTL NR 2	3 TPS	REP 4	5 B•S	6	MONO

Exposed Tape end

Press [ ] to switch to the program on the other side of the tape.

The display changes to indicate which program is playing.

Press [1] (MTL) again to cancel.

Press [5] (B•S) again to cancel.

Caution: Do not insert a tape when “tape” indicator “ ” or “ ” lights.

Note: Playing normal tapes in the metal tape mode causes high frequency imbalance, which affects tone quality.

Note: When repeat is on, the blank skip does not work because the repeat has priority over the blank skip.

Note: To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).

Notes on Cassette Tapes

Tape Slack:

Use a pencil or similar object to take up the slack as

Top Side Playing

Bottom Side Playing

Rewind and Fast Forward

Dolby B Noise Reduction

Press [2] (NR) to set the Dolby B NR. Press [2] (NR) again to cancel.

Note: Set the Dolby B NR when playing back a tape recorded with Dolby B Noise Reduction.

Repeat Play

Press [4] (REP) to repeat the current program.

Press [4] (REP) again to cancel.

shown. If a loose tape is used, this may result in the tape becoming tangled in the rotating parts of the unit.

Press [6 TRACK] or [7 TRACK] to activate rewind or fast forward of the tape.

Tape Program Search (TPS) Operation

Press [3] (TPS) to activate the tape program search.

Note: The TPS and B•S may not work correctly in the following cases. This, however, does not mean that the unit is defective.

Pencil

Exposed tape end (Open end)

Do not touch or pull out the

blinks

Press [ ] to stop rewind or fast forward.

If you rewind the tape fully, it will play on the same program side again.

To select a desired program, press [7 TRACK] or [6 TRACK] corresponding times to go forward (up to 9) or backward (up to 8).

•There is an interval less than 3 seconds (15 seconds in B•S) or having a high level of noise or hum between programs.

•There is particularly low-level passage during the program.

tape.

If you fast forward to the end, play will resume from the beginning of the other side of the tape.

	(Rewind:)		(Fast forward:)		Display Change
8	0	1		9
	c	c			Press [DISP] (display) to switch to the clock display.

To turn it off, press [3] (TPS) again.

Tape Clock display

16 CQ-R223W CQ-R223W 17