Slant/Fin GF-211D warranty Important Safeguards

Page 2

READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE YOUR HUMIDIFIER. FOLLOWING THESE SIMPLE GUIDELINES FOR USE AND CARE WILL HELP ENSURE YEARS OF DEPENDABLE AND EFFICIENT SERVICE.

IMPORTANT SAFEGUARDS

CAUTION: BECAUSE HIGH TEMPERATURE IS GENERATED IN THIS HUMIDIFIER, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED ESPECIALLY WHEN CHILDREN ARE PRESENT.

WHEN USING ELECTRICAL APPLIANCES, THESE BASIC SAFETY PRECAUTIONS MUST BE FOLLOWED:

1.DO NOT operate the humidifier without the water tank.

2.ALWAYS use clean, cool tap water to fill the water tank.

3.To avoid risk of fire or shock, DO NOT use an extension cord.

4.DO NOT handle the unit with wet hands.

5.NEVER tilt, move, or attempt to empty the unit while it is operat- ing or plugged in. Shut off, unplug and remove water tank before moving unit.

6.DO NOT place the unit close to heated areas, such as near stoves, heaters or in direct sunlight.

7.DO NOT operate OUTDOORS. This humidifier is intended for indoor use only.

8.DO NOT let water get into the air inlets on the bottom of the enclosure or on the cord or plug.

9.DO NOT store or use gasoline or other flammable vapors and liq- uids near the humidifier.

10.ALWAYS make sure the water tank cap and gasket are firmly in place.

11.DO NOT touch hot surfaces.

12.ALWAYS turn the humidifier off when the water tank is empty or when the unit is not in use. If you turn your unit off for extended periods, ALWAYS disconnect the power cord and empty the water tank and base.

13.ALWAYS place the unit on a firm flat, level, water resistant sur- face and arrange the power cord so that the product is unlikely to be upset.

14.DO NOT clean the product or service the UV bulb without discon- necting the power cord.

15.Before connecting to electric power outlet, check your electrical power supply. It must be 120 volts A.C. (alternating current). The outlet may be 15 amp or 20 amp. The circuit must be of adequate size and must be protected by fuse or circuit breaker.

2

Image 2
Contents Read and Save These Instructions Important Safeguards Place unit in an area where it is not accessible to children Humidity Control Panel POWER/MODEPower Filling the Water Tank Replace UV BulbOperating Instructions Mineral Absorption PAD Instructions Using the Medication CUP/MIST Outlet Grille OptionalCleaning and Maintenance Cleaning Instructions Changing the UV Bulb Storage Tips ServiceTroubleshooting Limited Warranty Important Notice

GF-211D specifications

The Slant/Fin GF-211D is a powerful and efficient gas-fired boiler designed for residential heating applications. This model exemplifies modern heating technology, offering both efficiency and reliability to homeowners. One of the standout features of the GF-211D is its exceptional heating output, making it suitable for various home sizes and heating demands. With a high BTU rating, it ensures that even larger homes can maintain a comfortable temperature during the coldest months of the year.

A central characteristic of the Slant/Fin GF-211D is its advanced design, which incorporates a cast-iron heat exchanger. This component is known for its durability and excellent heat retention capabilities, allowing the boiler to operate efficiently while providing consistent heat. The cast-iron construction also contributes to the longevity of the unit, minimizing the risk of wear and tear over time.

Another notable feature is the GF-211D’s utilization of a low-water cut-off. This technology enhances safety by preventing the boiler from operating when water levels are too low, protecting against potential damage. Additionally, the integrated venting system is designed for maximum efficiency, allowing for easy installation and reducing the risk of heat loss.

The Slant/Fin GF-211D boasts an Energy Star rating, highlighting its commitment to energy efficiency. Homeowners can expect lower energy bills and reduced environmental impact when utilizing this boiler. The unit is compatible with various heating systems, including hydronic and baseboard heating, providing versatility to meet diverse heating needs.

User-friendly controls are another hallmark of the GF-211D. The intuitive interface allows for easy adjustments to temperature settings and operation modes, empowering homeowners to optimize heating based on their specific requirements. The boiler also features multiple safety mechanisms, ensuring peace of mind during operation.

In summary, the Slant/Fin GF-211D gas-fired boiler stands out for its impressive heating capacity, durable construction, energy efficiency, and advanced safety features. Designed with modern technology in mind, it represents a dependable choice for those seeking an effective heating solution for their homes. With its combination of performance and reliability, the GF-211D is poised to deliver consistent comfort for years to come.