Mineral Absorption PAD Instructions

4.Place water tank on base. Make sure tank is properly placed, otherwise, the humidifier will not work correctly.

USING THE MEDICATION CUP/MIST OUTLET GRILLE (OPTIONAL)

In order to add a medicated vapor to the “mist” output:

1.Press “POWER/MODE” touch switch to the “OFF” position and allow the outlet grille to cool.

2.Lift the medication cup.

3.Carefully add liquid medication; DO NOT fill the cup more than half full.

4.Carefully replace the medication cup.

5.Press “POWER/MODE” to either the “LO” or “HI” position.

6.After use, remove the cup from the unit and clean any residue from the cup with warm water.

WARNING:

DO NOT use any liquid medication other than those specifically recommended for use with a steam vaporizer or warm mist humidifier.

DO NOT pour medication directly into the mist outlet grille openings nor add it to the water in the tank or tray.

Warm mist humidifiers do not spread fine mineral dust into the air that you breathe nor on your furniture, the way that other type humidifiers do. The mineral dust remains trapped in the humidifier hot water reservoir. Use of Mineral Absorption Pads will play a major role in capturing and removing minerals from hot water reservoir, and preventing a stubborn mineral buildup. The unit can run without pads, but more frequent cleaning will be required.

1.Before starting humidifier, place mineral absorption pad in the hot water reser- voir. After the humidifier has been operating, the water will become HOT, and CAUTION should be exercised when handling mineral absorption pad. It is best to allow humidifier water to cool down, and to use tongs or long tweezers when handling pad.

2.The useful life of the mineral absorption pad will vary, depending on the mineral content of the water used. In areas of moderate mineral content water supply, the mineral absorption pad should be changed after approximately (3) weeks of continuous use. If the water is “Hard Water”, the pad should be changed more frequently. The best way to tell when the pad should be changed is to examine it AFTER the water has cooled down, to see if it is still soft and pliable. When the pad is near the end of its life, it becomes stiff and hard and should be replaced with a new pad. Another sign to change pad is when scale begins to buildup on interior of hot water reservoir.

CLEANING AND MAINTENANCE

Water contains minerals and other particles. During operation most of these miner- als will remain in the water reservoir. Gradual buildup of deposits will coat the hot water reservoir and reduce its efficiency. The importance of routine cleaning and care cannot be over-emphasized. Hard water contains more minerals and other particles. If pad appears to disintegrate (normally due to use of softened water) dis- continue use of pads.

GF-211D specifications

The Slant/Fin GF-211D is a powerful and efficient gas-fired boiler designed for residential heating applications. This model exemplifies modern heating technology, offering both efficiency and reliability to homeowners. One of the standout features of the GF-211D is its exceptional heating output, making it suitable for various home sizes and heating demands. With a high BTU rating, it ensures that even larger homes can maintain a comfortable temperature during the coldest months of the year.

A central characteristic of the Slant/Fin GF-211D is its advanced design, which incorporates a cast-iron heat exchanger. This component is known for its durability and excellent heat retention capabilities, allowing the boiler to operate efficiently while providing consistent heat. The cast-iron construction also contributes to the longevity of the unit, minimizing the risk of wear and tear over time.

Another notable feature is the GF-211D’s utilization of a low-water cut-off. This technology enhances safety by preventing the boiler from operating when water levels are too low, protecting against potential damage. Additionally, the integrated venting system is designed for maximum efficiency, allowing for easy installation and reducing the risk of heat loss.

The Slant/Fin GF-211D boasts an Energy Star rating, highlighting its commitment to energy efficiency. Homeowners can expect lower energy bills and reduced environmental impact when utilizing this boiler. The unit is compatible with various heating systems, including hydronic and baseboard heating, providing versatility to meet diverse heating needs.

User-friendly controls are another hallmark of the GF-211D. The intuitive interface allows for easy adjustments to temperature settings and operation modes, empowering homeowners to optimize heating based on their specific requirements. The boiler also features multiple safety mechanisms, ensuring peace of mind during operation.

In summary, the Slant/Fin GF-211D gas-fired boiler stands out for its impressive heating capacity, durable construction, energy efficiency, and advanced safety features. Designed with modern technology in mind, it represents a dependable choice for those seeking an effective heating solution for their homes. With its combination of performance and reliability, the GF-211D is poised to deliver consistent comfort for years to come.