| Installation | |
HAMILTON | Instructions | |
7024 | ||
Centerset Lavatory Faucet with |
EverClean™ Finish & Speed Connect™ Drain
Congratulations on purchasing your American Standard faucet with the EverClean finish and Speed Connect Drain, two features found only on American Standard faucets.
EverClean Finish | Speed Connect Drain* |
Certified to comply with ANSI A112.18.1
M968867 Rev. 1 . 1
•One wipe effortlessly removes spots
•Eliminates the need for cleaners and scrubbing
•Permanent surface protectant remains beautiful for the life of the faucet
•1/3 of the parts, installs in 1/3 of the time
•No tools needed
•Never needs adjustment
•Guaranteed to seal properly the first time, every time.
*Your new American Standard faucet is designed to work only with the Speed Connect Drain. Helpful tips for removing your current drain can be found in the Troubleshooting section of these instructions.
To ensure that your installation proceeds
Recommended tools
ScrewdriverChannel LocksAdjustable WrenchTubing Cutter
1 |
|
| Turn off hot and cold water |
| INSTALL FAUCET | CAUTION | |
| supplies before beginning. | ||
|
|
|
|
Turn off hot and cold water supplies before beginning. |
| |
Fig. A. | ||
Insert FAUCET (1) and CABLE CONNECTOR (2) through | ||
| ||
mounting holes of Sink or mounting surface. Fig. A. |
| |
Assemble LOCKNUTS (3) onto SHANKS (4) from under |
| |
side of Sink. Hand tighten firmly. Fig. B. |
|
(HAND TIGHTEN) | 1 |
3
44
Fig. B.
SINK OR
MOUNTING
SURFACE
2
3
2
1