Jabra BT250v Choosing wearing preference, Making a call, Ending a call, Answering a call

	Status indicators
	What you see	What you hear	Status
English	Flashes every	Quick series of 2 tones	Active Mode⁵
	second	– low to high pitch (when	•	Call in progress
		active mode starts)	•	Up to 7 hours of talk-time*
	Flashes every	Quick series of 2 tones	Standby Mode⁶
	3 seconds	– high to low pitch (when	•	Waiting for call
		standby mode starts)	•	Up to 200 hours of
				standby time*
	3 flashes every	3 beeps every 30 seconds	Low Battery (in active mode)
	second		•	3 – 5 minutes of talk time left
	3 flashes every	3 beeps every 5 minutes	Low Battery (in standby mode)
	3 seconds		•	3 – 5 minutes of talk time left

*Depending on phone type and usage.

IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when turning the headset on or else it may go into pairing mode, and the blue indicator light will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat process for turning the headset on.

7Choosing wearing preference

Jabra BT250v is ready to wear on the right ear. If you prefer the left, gently rotate the MiniGel 180°.

For optimal performance, wear Jabra BT250v and your Bluetooth phone on the same side of your body. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone.

Fig. 4

8Making a call

If Jabra BT250v is off, turn it on now (see Turning headset on/off section).		English
Using phone’s keypad
1.	Dial number on keypad.
2.	Press phone’s “send” key.

Using voice-activated dialing (after you’ve set up voice tags on your phone)

1.Press and release once. You’ll hear 1 short beep while doing this.

2.You’ll then hear the voice-activation tone; say the name of the person you wish to call.

NOTE: Record voice tag from headset for better reception.

9Ending a call

•Press and release once

OR

•End call from phone’s keypad

10Answering a call

•After you hear the ring tone, press and release once

OR

•Answer the call with your phone’s keypad. You may then need to transfer the call to the headset by pressing and releasing once (depending on your phone)

11Call-waiting*

•(Recommended) Use standard method from your phone’s keypad which typically involves pressing the “send” button

OR

•Press and release once to answer the incoming call and toggle between calls (some phones do not support this headset feature)

6 7