American Standard 2071S installation instructions Install POP-UP Drain, Water Supply Connections

Page 2

2 INSTALL POP-UP DRAIN

Push Tail piece (11) down into Trap (C) (threaded end up).

Thread Locknut (5), Washer (4) and Gasket (3) (Bevel side up) onto Drain Body (10).

Apply a bead of Putty (D) to underside of Flange (2).

Feed Drain Body (10) up through Sink (A) and thread the Flange (2) or (2A) fully onto Drain Body (10).

Tighten Locknut (5) firmly, keeping the pivot rod hole pointed towards the back of the sink.

Assemble Pivot Rod (9) as shown in Figure-3A. Notice the position of the Concave Washer (G).

Insert Pivot Rod (9) into Drain Body (10) and tighten Pivot Nut (F).

Push TAILPIECE INSERT (12) into TAILPIECE (11) and push TAILPIECE up and thread tightly into DRAIN BODY (10).

Position Extension Rod (7) onto Pop-Up Rod (E) and tighten Thumbscrew (6).

1

2

A

3

4

5

10

D

E

6

7 7

F8

Remove one end of Clip (8) from Pivot Rod (9) by squeezing ends together while sliding.

12

11

C

9

Insert Pivot Rod (9) or (9A) into second or third hole in Extension Rod (7) and reassemble Clip (8).

Drop Stopper (1) into Drain Body (10).

Adjust stopper height by repositioning Extension Rod (7) and tightening Thumbscrew (6).

3 WATER SUPPLY CONNECTIONS

Note: FLEXIBLE HOSES (1, 2) on FAUCET (3) are (17-1/2") in length from base of faucet. If longer supply length is required installer must purchase adapters and additional supplies to complete connections.

Important: If SUPPLY HOSES (1, 2) are to long, loop as illustrated to avoid kinking .

Connection on FLEXIBLE HOSES (1, 2) are 3/8" compression. Connect LEFT SUPPLY (1) to Hot shut off valve and RIGHT SUPPLY (2) to Cold shut off valve.

Use adjustable wrenches to tighten connections. Do not over tighten.

O-RING

3

1-1/4"

9

 

G

F

FIGURE-3A:

(17-1/2")

1

COLD2

3/8" compression

HOT

SHUT OFF

VALVE

 

M 9 6 8 2 9 0 A

Image 2
Contents 2071S Install Faucet2071 Do notInstall POP-UP Drain Water Supply ConnectionsTest Installed Faucet and Check for Leaks Adjust HOT Limit Stop002 2071 2071SReplace the YYY with appropriate finish code 295

2071, 2071S specifications

The American Standard 2071S and 2071 are renowned models in the realm of bathroom fixtures, particularly in the category of innovative and durable toilets. These units stand out for their efficient design, high-performance flushing technology, and remarkable comfort, making them a favorite among homeowners and builders alike.

One of the primary features of the American Standard 2071S and 2071 toilets is their advanced flushing system. These models utilize the EverClean surface, which is treated to resist stains and bacteria, promoting cleanliness and hygiene in the bathroom. With a powerful siphon jet flush, they ensure a complete and effective removal of waste, reducing the chances of clogs and making maintenance straightforward. The efficient flush mechanism not only optimizes performance but also conserves water, as these toilets are designed to use significantly less water per flush compared to traditional models.

Another standout characteristic is their height, with a comfortable elongated bowl that offers added space and comfort, catering to users of all ages and physical abilities. These toilets also boast a sleek and modern design, making them an aesthetically pleasing addition to any bathroom décor. The contemporary look combines function and elegance, appealing to design-conscious consumers.

The installation process is another highlight of the American Standard 2071S and 2071. They are designed for easy installation, and the robust construction ensures durability and longevity. Each model is crafted from high-quality vitreous china, ensuring resistance to chipping and scratching, thereby maintaining the toilet's pristine appearance over time.

In terms of water efficiency, both models meet environmental standards and regulations. American Standard has integrated WaterSense technology, promoting a significant reduction in water consumption without sacrificing performance. This eco-friendly approach not only contributes to environmental conservation but also helps homeowners save money on their water bills.

Lastly, the American Standard 2071S and 2071 toilets come with an array of certifications, further validating their quality and reliability. Homeowners can trust that they are investing in a product engineered for performance, comfort, and sustainability, making these toilets a smart choice for any modern bathroom. Whether for new construction or a renovation project, the American Standard 2071S and 2071 serve as exemplary models of how innovation can enhance everyday amenities.