Install Toilet on Flange

LAG

BOLT

TAPERED

WASHERS

FLANGE

BOLTS

FLANGE

a. Unplug wall waste opening and slide toilet towards closet flange so bolts project through mounting holes.

b. Loosely install retainer tapered washers and nuts. Side of washers marked "THIS SIDE UP" must face you!

BOLT

CAP

NUT &
WASHER
	BOLT
	CAP
WASHER	BOLT HEAD

INSTALL TOILET

a. Position toilet squarely to wall and, with a rocking motion, push bowl against ring and flange.

Alternately tighten nuts until toilet is firmly anchored.

!CAUTION: DO NOT OVERTIGHTEN NUTS OR BASE MAY BE DAMAGED!

b.Insert the tapered washers (supplied in the kit) into the lag bolts (not supplied). Insert bolts through mounting holes and tighten into pre-drilled floor openings.

c.Install the bolt caps on tapered washers. (If necessary, cut wall bolt length to size before installing caps.)

d.Smooth off the bead of sealant around base. Remove excess sealant.

7INSTALL TOILET SEAT Install toilet seat in accordance with manufacturer's directions.

8CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish.

AS AMERICA, INC. ONE-YEAR LIMITED WARRANTY

If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall

American Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

In the United States:	In Canada:	In Mexico:
American Standard Inc.	American Standard	Customer Service Manager
P.O. Box 6820	2480 Stanfield Rd.	Ideal Standard, S.A. de C.V.
Piscataway, New Jersey 08855	Mississauga, Ontario	Via Morelos #330
Attention: Director of Consumer Affairs	Canada L4Y 1S2	Col. Santa Clara
For residents of the United States, warranty	Toll Free: (800) 387-0369	Ecatepec 55540 Edo. Mexico
information may also be obtained by calling	www.americanstandard.ca	www.americanstandard.com.mx
the following toll free number: (800) 442-1902		www.americanstandard.com.mx
the following toll free number: (800) 442-1902
www.americanstandard-us.com

7301198-100

- 2 -

3698.128, 3697.128, 3698.016, 3695.128, 3695.016 specifications

The American Standard 3695.016, 3698.016, 3695.128, 3697.128, and 3696.128 models represent a group of bathroom fixtures known for combining innovative design with practical functionality. These products are primarily targeted towards homeowners and builders looking for quality and style in bathroom settings.

One distinctive feature of these models is their exceptional water efficiency. Each fixture is engineered to meet and exceed WaterSense standards, providing a sustainable solution without compromising performance. This focus on water conservation not only helps to reduce utility bills but also contributes positively towards environmental stewardship.

The 3695.016 and 3698.016 models are characterized by their sleek lines and modern aesthetics, making them ideal for contemporary bathrooms. The ceramic disc valves used in these faucets guarantee a lifetime of drip-free performance, while their elegant design adds to the overall visual appeal. These models are available in a variety of finishes, allowing for customization to match existing decor.

In addition, the 3695.128 and 3696.128 models are well-known for their ease of installation and user-friendly designs. Equipped with innovative technologies, such as the American Standard EverClean surface, these fixtures resist the growth of bacteria, mold, and mildew, ensuring a cleaner and more hygienic bathroom environment.

Another noteworthy feature across this range is the incorporation of comfort height. This design consideration allows the fixtures to be more accessible for users of all ages and physical abilities, enhancing usability without sacrificing visual appeal. The height adjustment proves particularly beneficial for taller individuals and those with mobility challenges.

The 3697.128 model emphasizes safety as well, integrating an anti-scald feature that ensures consistent temperature control. This technology minimizes the risk of accidental burns, providing peace of mind for families and ensuring a pleasant bathing experience.

Overall, the American Standard 3695.016, 3698.016, 3695.128, 3697.128, and 3696.128 bathroom fixtures amalgamate style, comfort, and eco-consciousness. With their combination of advanced technologies and elegant design elements, these models offer homeowners a sophisticated and functional solution for modern bathroom needs. Whether you're renovating or building from the ground up, these fixtures stand as a testament to American Standard's commitment to quality and innovation in bathroom design.