ENGLISH
Pairing
Pairing is the process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth phone. Normally you need to pair your headset with your phone only once. To see a demo of the pairing process, visit www.plantronics.com/EasyToPair.
QuickPair™ Technology
Your new headset includes Plantronics QuickPair technology to simplify the Bluetooth setup process. The first time you turn your headset on, your headset automatically enters pairing mode for 10 minutes. Once paired successfully, your headset stays on for instant use.
If not sucessfully paired after 10 minutes, your headset automatically powers off. When you turn the headset on again, it automatically goes into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
1.Turn ON the Bluetooth feature on your phone.
3 
2 | 4 |
| |
| 1 |
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone’s user guide for more information.
2.Press and hold the call control button to turn on your headset. (The indicator flashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue flash, press and hold the call control button to turn your headset off, and then press and hold the call control button again until you see the red/blue flash.
3.Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > Search > 5XXPlantronics. See your phone’s user guide for more information.
4.When prompted for the passkey, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your headset is now connected and ready to use.
6 | Plantronics Voyager 520 |